User Manual

47
Playing in Single Mode
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
The Fantom-G has four patch banks, including the User, Preset, User
Sample and GM.
USER
This is the bank inside the Fantom-G which can be rewritten. Patches
you create can be stored in this bank. You can store 512 patches.
PRST (Preset)
This is the bank inside the Fantom-G which cannot be rewritten.
However you may modify the settings of the currently selected
patch, and then store the modified patch in user bank.
GM (GM2)
This is an internal bank of patches compatible with General MIDI 2,
a system of MIDI function specifications designed to transcend
differences between makers and types of devices; these patches
cannot be overwritten. However you may modify the settings of the
currently selected patch, and then store the modified patch in user
bank. The Fantom-G includes 256 preset patches.
USAM (User Sample)
This bank lets you play the Fantom-G’s internal samples.
1. Press [SINGLE] to access the Single Play screen.
fig.05-001.e
2. Press [CURSOR] to move the cursor to the patch bank.
Turn the VALUE dial or use [INC] [DEC] to choose the patch
bank.
USER: User
PRST: Preset
GM: GM (GM2)
USAM: User Sample
* Make sure that the patch type is set to “Patch.”
If this is set to “Rhythm” or “Sample,” use [CURSOR] to move the
cursor to the patch type, and turn the VALUE dial or press [DEC] to
select “Patch.”
3. Press [CURSOR] to move the cursor to the patch number.
4. Turn the VALUE dial, or press [INC] [DEC] to select a patch
number.
You can also use the pads as numeric keys to enter numbers
(patch numbers). → “Using the pad for numeric input” (p. 41)
5. Play the keyboard to hear the sound.
You can also use the following methods to select a patch.
“Selecting Patches by Category (Patch Finder)” (p. 48)
“Selecting Patches from the List” (p. 49)
Selecting a Patch
Patch number / Patch name
Patch type Patch bank Patch category
Fantom-G_r_e.book 47 ページ ２００８年１月３１日 木曜日 午後１２時１５分