User Manual

51
Playing in Single Mode
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
Single mode has the following three parts.
In the Part View screen you can view and edit the volume and pan
settings of these three parts.
1. Press [SINGLE] to access the Single Play screen.
2. Press [F3 (Part View)].
The Part View screen will appear.
fig.08-017_50
3. Press [F1 (Up)] or [F2 (Down)] to select the parameter
group.
4. Use [CURSOR] to move the cursor to the parameter.
5. Either turn the VALUE dial or use [INC] [DEC] to set the
value.
6. If you want to keep the settings, press [F7 (Sys Write)].
When Single mode is selected, part settings cannot be saved for
each individual patch. Part settings are saved as system
settings.
7. When you have finished making settings, press [EXIT] to
return to the Single Play screen.
See “Level/Pan (When the Part Group is Internal/EXP1/
EXP2)” (p. 134)– “MIDI Rx Filter” (p. 141) for each parameter’s
functions.
The Fantom-G lets you assign the parameters that will be affected
when you operate the 1–4 knobs, 1–8 sliders, S1/S2 switches, D
Beam, pitch bend, or modulation lever. This lets you modify the
sound in a variety of ways by operating the controllers.
1. Press [SINGLE] to access the Single Play screen.
2. Press [F4 (Control)].
The Control Setting screen will appear.
fig.05-017_50
3. Press [F1 (Up)] or [F2 (Down)] to select the parameter
group.
4. Use [CURSOR] to move the cursor to the parameter.
5. Either turn the VALUE dial or use [INC] [DEC] to set the
value.
6. If you want to keep the settings, press [F7 (Sys Write)].
When Single mode is selected, controller settings cannot be
saved for each individual patch. Controller settings are saved as
system settings.
7. When you have finished making settings, press [EXIT] to
return to the Single Play screen.
See “D Beam” (p. 143)– “Ctrl Switch” (p. 147) for each
parameter’s functions.
Part Settings (Part View)
Part
Explanation
1
Keyboard The part that is heard when you play the
keyboard
7 Sample
Pad
The part that is heard when you set the
pads to “1 SAMPLE PAD (Using the
Pads to Play Samples)” (p. 191) mode
8 Rhythm
Pad
The part that is heard when you set the
pads to “2 RHYTHM (Using the Pads to
Play a Rhythm Set)” (p. 192) mode
Selecting the Parameter
Controlled by the Realtime
Controllers or D Beam
Controller (Control Setting)
Fantom-G_r_e.book 51 ページ ２００８年１月３１日 木曜日 午後１２時１５分