User Manual

55
Creating a List of Frequently Used Sounds (Favorite)
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
Using the pads to recall sounds
1. In the Favorite screen, press [F5 (Dynamic Pad)].
The pads will be set to Favorite mode.
• Now you can press pads
[1]–[16] to select the sound
(step) that’s registered for
each pad.
• You can press
[ROLL](BANK) to switch
banks (1–6). → p. 189
If you want to use the pads to successively switch between live
sets (or studio sets), set the system parameter “Pad Assign
Source” (p. 288) to “SYS.” If this is set to “TEMP,” the pad
mode will change to the setting of that particular live set (or
studio set) when you switch to a live set (or studio set).
Using the Favorite screen to recall
sounds
1. Press [FAVORITE].
The Favorite screen will appear.
2. Press [F1 Bank ] or [F2 Bank ] to select the bank
from which you want to recall sounds.
3. Press [F3 Step ] or [F4 Step ] to select the step
number (1–16) that you want to recall.
The selected sound will be recalled immediately.
As an alternative to step 3, you can also press or to select
the he step number. In this case, the sound will not be switched
until you press [ENTER].
Here’s how to specify the volume (Favorite Level) for each step. Use
this to adjust the volume of each sound in your live performance.
1. In the Favorite screen, press or to move the cursor
to the step whose volume you want to adjust.
2. Use knob 4, [INC] [DEC], or the VALUE dial to specify the
volume (Favorite Level).
Range: 0–127
Here’s how to move a registered sound to a different step.
1. In the Favorite screen, press or to move the cursor
to the step at which the sound you want to move is
registered.
2. While holding down [SHIFT], press or to move the
sound.
Here’s how to remove a registered sound from the favorites list.
1. In the Favorite screen, press or to move the cursor
to the step whose registration you want to remove.
2. Press [F7 (Remove)].
For example if you remove the registration from step number 02
of bank 1, the display will indicate “Remove 1-02,” and that step
will be empty.
Here’s how to remove all sound registrations from a bank.
1. In the Favorite screen, press [F1 Bank ] or [F2 Bank ]
to select the bank whose sound registrations you want to
remove.
2. Press [F6 (Util Menu)].
The Favorite Utility Menu window will appear.
3. Press or to select “Remove Bank,” and then press
[F8 (Select)].
If you removed all registrations from bank 1, the display will
indicate “Remove Bank 1,” and that bank will be empty.
Recalling a Sound Specifying the Volume for Each
Step (Favorite Level)
Changing the Step in Which You
Registered a Sound
Removing a Sound You Registered
(Remove)
Removing All Sound Registrations
from a Bank (Remove Bank)
Fantom-G_r_e.book 55 ページ ２００８年１月３１日 木曜日 午後１２時１５分