User Manual

78
Playing Arpeggios
The Fantom-G’s Arpeggio function lets you produce arpeggios
automatically; simply hold down some keys, and a corresponding
arpeggio will be played automatically.
Use “Arpeggio Part Number” (p. 146) to specify the parts that
will use the Arpeggio function. The Chord Memory function (p. 80)
will also apply to the parts selected by the Arpeggio Part setting.
If you want to play arpeggios in Live mode or Studio mode,
you’ll also need to check the “Arpeggio” (p. 146) parameter of
the live set or studio set.
1. Press [ARPEGGIO] to turn it on.
The button will light.
2. Play a chord on the keyboard.
The Fantom-G will play an arpeggio, according to the notes
forming the chord you have just voiced.
3. To finish playing arpeggios, press [ARPEGGIO] again to
turn it off.
For details regarding each parameter, refer to “Arpeggio
Settings” (p. 78).
This sets the arpeggio/rhythm tempo.
1. Press [TEMPO].
The current tempo value appears in the display.
2. Press VALUE dial or [INC], [DEC] to set the tempo value
(5.00–300.00), or set the value by tapping [F6 (Tap Tempo)]
a number of times with the same rhythm (Tap Tempo).
By holding down [SHIFT] and turning the VALUE dial you
can adjust the value below the decimal point.
* If you press [F7 (Click)] to turn on, the click will sound.
3. When you have made the setting, press [F8 (Close)].
By using the following procedure, you can produce arpeggios even
without continuing to press the keyboard.
1. Press [HOLD].
The indicator will light.
2. Play a chord on the keyboard.
3. If you play a different chord or notes while the arpeggio is
being held, the arpeggio will change accordingly.
4. To cancel Arpeggio Hold, press [HOLD] once again.
When Using a Hold Pedal
If you play an arpeggio while pressing the hold pedal, the arpeggio
will continue to be played even if you release the chord.
1. Connect an optional pedal switch (DP series etc.) to the
HOLD PEDAL jack.
2. Press [ARPEGGIO] to turn on the arpeggio.
3. Play a chord while pressing the hold pedal.
4. If you play a different chord or notes while the arpeggio is
being held, the arpeggio will change accordingly.
1. Hold down [SHIFT] and press [ARPEGGIO].
2. Press [CURSOR] to move the cursor to each parameter, and
either turn the VALUE dial or press [INC] or [DEC] to make
the setting.
3. When you have made the setting, press [EXIT].
Style (Arpeggio Style)
Specifies the basic way in which the arpeggio will be played.
Variation (Arpeggio Variation)
The arpeggiator provides several variations (performance patterns)
for each arpeggio style. This parameter selects the variation number.
The number of variations will differ according to the arpeggio style.
About Arpeggio
Playing Arpeggios
Turning Arpeggio On and Off
Determining the Tempo for
Arpeggio Performances
Using in Combination with the Chord
Memory Function
When performing with the Arpeggio, you can also use it along
with the Chord Memory function (p. 80). After first storing
complex Chord Forms in memory, you can then call them up
when Arpeggio function is on, and you can easily play complex
arpeggio sounds just by pressing a single key.
Holding an Arpeggio
Arpeggio Settings
Fantom-G_r_e.book 78 ページ ２００８年１月３１日 木曜日 午後１２時１５分