User Manual

12
Advanced Operation
Renaming a Song (Rename Song)
Here’s how to rename a previously-saved song.
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Rename Song.”
2. Press the [Function] (Enter) button.
The Rename Song screen appears.
3. Use the [–] [+] buttons to select the media that contains the
song that you want to rename.
4. Press the cursor [J] (right) button.
5. Use the [–] [+] buttons to select the song that you want to
rename, and then press the cursor [J] (right) button.
6. Rename the song.
Button Operation
[K] [J] buttons
Select the character to change.
[–] [+] buttons Change the character.
If you decide to cancel, press the [Exit] button.
7. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
8. Use the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
The song is renamed.
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
9. Press the [Exit] button several times to exit Function mode.
Copying a Saved Song (Copy Song)
Songs that have been saved in internal memory can be copied to USB ash
drive. Alternatively, songs stored on a USB ash drive can be copied to
internal memory.
* Audio les cannot be copied.
* If a USB ash drive is not connected, you won’t be able to perform this
operation.
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Copy Song.”
2. Press the [Function] (Enter) button.
The Copy Song screen appears.
3. Use the [–] [+] buttons to select the copy-source and copy-
destination memory locations.
4. Press the cursor [J] (right) button.
5. Use the [–] [+] buttons to select the song that you want to
copy.
If you decide to cancel, press the [Exit] button.
6. Press the [Function] (Enter) button.
The copy is executed.
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
MEMO
If a song with the same le name has already been saved, the
conrmation message “Overwrite?” appears. To overwrite the
song, use the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
7. Press the [Exit] button several times to exit Function mode.