User Manual

16
Advanced Operation
˙
Convenient Functions
Reformatting Memory (Format Media)
You can completely erase all data that were saved in internal memory or on
a USB ash drive.
NOTE
5 All data saved in internal memory or on the USB ash drive
will be erased when you initialize the media.
5 If you want settings other than the internal memory and
USB ash drive data to be returned to their factory-set state,
execute a Factory Reset (p. 16).
1. If you want to initialize a USB ash drive, connect the USB
ash drive to the USB Memory port (p. 5).
2. Press the [Function] button, and then use the [K] [J]
buttons to select “Format Media.”
3. Press the [Function] (Enter) button.
The Format Media screen appears.
If you decide to cancel, press the [Exit] button.
4. Use the [–] [+] buttons to select the media that you want to
format.
5. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
6. Use the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
The memory is formatted.
NOTE
Do NOT turn o the power or disconnect the USB ash drive
while “Executing...” is displayed.
7. Press the [Exit] button several times to exit Function mode.
Restoring the Factory Settings (Factory Reset)
Here’s how to restore all registrations and internally saved settings to the
factory-set condition. This function is called “Factory Reset.”
NOTE
A factory reset returns all of your saved settings to their factory
values.
MEMO
Executing this function does not erase the data in internal
memory or on a USB ash drive (sold separately). If you want to
erase all songs from internal memory or from a USB ash drive,
refer to “Reformatting Memory (Format Media)” (p. 16).
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Factory Reset.”
2. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
3. Press the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
The memory is reset to its factory values.
NOTE
Do NOT turn o the power while “Executing...” is displayed.
4. Turn the power o, then on again (p. 4).
Retaining Settings After Power-O (Memory Backup)
Temperament settings, equalizer settings, and other settings are reset to
their default values when the FP-60 is turned on.
You can automatically restore the desired settings if you save them in
internal memory.
MEMO
For a list of settings saved by Memory Backup, see “Saved
Settings” (p. 27).
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Memory Backup.”
2. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
3. Press the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
Memory Backup will be carried out.
NOTE
Do NOT turn o the power while “Executing...” is displayed.
4. Press the [Exit] button several times to exit Function mode.