User Manual

2
°
Read This First
Placing the FP-60 on a Stand
Please use one of the following Roland stands to support your FP-60: KSC-72, KS-G8B, or KS-12 (sold separately).
Refer to the following when using a stand.
* Be careful not to pinch your ngers when setting up the stand.
Basic Operations
On this piano, you can use the buttons of the operating panel to make various function settings.
The “K” “J,” “-” “+,” “Enter (Func) ,” and “Exit” indications shown in the screen indicate the buttons used to operate the various functions.
Screen display
Upper line: shows the category to specify
(you can use the [K] [J] buttons to change this)
Lower line: shows the value within the category
(you can use the [-] [+] buttons to change this)
Selecting the category to set
Use the [K] [J] buttons to select the category that you want to set.
Selecting values within a category
Use the [-] [+] buttons to change a value within the category.
“Enter” and “Exit”
Use the [Function] (Enter) button to conrm the selected category or value.
Use the [Exit] button to go back to the previous operation.
KS-12
* For safety, do not use
the stand in its very
highest adjustment
position.
Adjust the
horizontal
width
Adjust the horizontal width so that
the rubber feet on the bottom of
the piano t into the depressions
(four locations) of the stand.
Top view
front
KSC-72 (Dedicated stand for FP-60)
Refer to KSC-72 Owner’s Manual.
* The pedal board (KPD-90) is sold
separately.
KS-G8B
Align the centers
of the piano and
the stand
* For safety, do not use
the stand in its very
highest adjustment
position.
front rear
Position the piano so that the
pad at the rear of the stand
is immediately in front of the
row of screws on the bottom
of the piano
Pad
row of
screws