User Manual

23
Advanced Operation
Indication
[K] [J] buttons
Parameter
[-] [+] buttons
Explanation
Bluetooth Turn/MIDI Refer to “Using the Piano with an App” (p. 19).
Bluetooth ID Refer to “If you have more than one piano” (p. 18).
Input/Bluetooth Vol.
Adjusting the Volume of an Audio Playback Device or Bluetooth Audio (Input/Bluetooth
Vol.)
You can adjust the volume of the audio playback when an audio playback device is connected to the Input Stereo jack or via Bluetooth.
0–10
SMF Play Mode
Specifying the Song (SMF) Playback Mode (SMF Play Mode)
When playing back a song (SMF), select the appropriate setting depending on whether you’re playing an internal song or external data. Normally
you will use the “Auto Select” setting.
This determines whether the setting that is most suitable for the internal song or most suitable for external data is selected when you play back a
song whose le format is SMF.
MEMO
You can also switch the SMF Play Mode by holding down the [s] button and using the [–] [+] button.
Some of the Piano Designer eects are not reproduced if the SMF Play Mode is set to “External.”
Auto-Select Automatically switches the SMF Play Mode to either “Internal” or “External” depending on the song that is being played.
Internal
When you play back an internal song, the tone used for keyboard performance automatically changes to the tone of the
internal song. This is recommended when you play back an internal song or a song that you recorded on this piano.
External
Even when playing back external data, the tone used for keyboard performance can be specied independently of
the tone used to play the external data. This is recommended when you play back external data such as commercially
available music data.
Recording Mode
Selecting the Format for Recording (Recording Mode)
You can choose whether to record as SMF or as audio.
MEMO
You can also switch the Recording Mode by holding down the [t] button and using the [–] [+] button.
SMF Record your performance, and play it back on the piano.
Audio
Record as audio data. (WAV format, 44.1 kHz, 16-bit, linear)
Your recorded piano performance can be played back on your computer or audio player, or you can use it to make a CD.
Rename Song Refer to“Renaming a Song (Rename Song)” (p. 12).
Copy Song Refer to“Copying a Saved Song (Copy Song)” (p. 12).
Delete Song Refer to“Deleting a Saved Song (Delete Song)” (p. 11).
Format Media Refer to “Reformatting Memory (Format Media)” (p. 16).
Damper Pedal Part
Changing How the Pedal Eects Are Applied (Damper Pedal Part)
When you press the pedal connected to the Pedal Damper jack during “Dual Play” or “Split Play,” the pedal eect is normally applied to both tones,
but you can also select the tone to which the eect is to be applied.
Right & Left All enabled
Right Applied only to the Tone 1 (in Dual Play)/Right-hand Tone (in Split Play)
Left Applied only to the Tone 2 (in Dual Play)/Left-hand Tone (in Split Play)
Center Pedal
Changing the Function of the Center Pedal (Center Pedal)
Use this feature to change the function of the pedal connected to the Pedal Sostenuto jack.
Sostenuto *1 The pedal functions as a sostenuto pedal.
Soft *2 Sets function to soft pedal.
Start/Stop
The pedal will have the same function as the [s] button.
Layer In Dual Play, you can control of the Tone 2 volume.
Expression *3
Allows control of the volume. You may nd it convenient to connect an expression pedal (EV-5: sold separately). Does not
change the recorded performance play.
Master Expression Controls the overall volume of the FP-60.
Bend Up *3 Pitch rises when pedal is depressed.
Bend Down *3 Pitch is lowered when pedal is depressed.
Modulation *3 Vibrato is added when pedal is depressed.
Rotary Sw When using the rotary eect, switches the rotary eect between slow and fast.
*1 Only works on the Center Pedal Function.
*2 Only works on the Left Pedal Function.
*3 Works only on the tone set as the corresponding pedal part (Center Pedal Part or Left Pedal Part).
* Use only the specied expression pedal. By connecting any other expression pedals, you risk causing malfunction and/or damage to the piano.
Center Pedal Part
Changing How the Pedal Eects Are Applied (Center Pedal Part)
When you press the pedal connected to the Pedal Sostenuto jack during “Dual Play” or “Split Play,” the pedal eect is normally applied to both tones,
but you can also select the tone to which the eect is to be applied.
Refer to “Changing How the Pedal Eects Are Applied (Damper Pedal Part)” (p. 23).
Left Pedal
Changing the Function of the Left Pedal (Left Pedal)
Use this feature to change the function of the pedal connected to the Pedal Soft jack.
Refer to “Changing the Function of the Center Pedal (Center Pedal)” (p. 23).
Left Pedal Part
Changing How the Pedal Eects Are Applied (Left Pedal Part)
When you press the pedal connected to the Pedal Soft jack during “Dual Play” or “Split Play,” the pedal eect is normally applied to both tones, but
you can also select the tone to which the eect is to be applied.
Refer to “Changing How the Pedal Eects Are Applied (Damper Pedal Part)” (p. 23).
page
10