User Manual
Table Of Contents
- Introduction
- Contents
- Main Features
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Songs
- Performing
- Performing with a Variety of Sounds
- Simulating the Way that Sounds are Created on an Organ (Tone Wheel)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Adding a Spinning Sound to Organ Tones (Rotary Effect)
- Transposing the Key of the Keyboard or Song Playback (Transpose)
- Performing with the Metronome
- Adding Liveliness to the Sound (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Performing with Audio Files (Audio Key)
- Creating a Piano Sound to Your Taste (Piano Designer)
- Playing Along with Rhythms
- What is Session Partner?
- Performing Along with Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing with the Chord Progression Specified in the Left Hand (Chord Progression Off)
- Changing the Rhythm Pattern (Original/Variation)
- Recording the Chord Progression
- Saving Your Favorite Performance Settings
- Recording
- Saving a Performance
- Various Settings
- Connecting Other Equipment
- Appendices
118
Various Settings
A pedal connected to the Soft/(FC2) jack normally functions
as a soft pedal (p. 21). A pedal connected to the Sostenuto/
(FC1) jack normally functions as a sostenuto pedal (p. 21).
It can also be set to function as an another works.
If a pedal connected to the FP-7 is assigned to switch
registrations, that pedal will operate only to switch
registrations. The function assigned to the pedal will
not operate.
You can select from the following pedal functions.
* What is the leading bass function?
The function that sounds the lowest note of a fingered chord as
the bass tone is called “Leading Bass.”
With certain sounds, the function may not work.
Use only the specified expression pedal (EV-5; sold
separately). By connecting any other expression
pedals, you risk causing malfunction and/or
damage to the unit.
This may not work correctly if you connect a pedal
other than an expression pedal or a half-damper
compatible pedal.
Be sure to switch off the power to the unit before
attempting to disconnect or connect a pedal cord.
Changing the Works of the Sostenuto
Pedal (FC1)
When the instrument is turned on, this is set to function as a
sostenuto pedal.
1.
Press the [Function] button.
2.
Press the [E.Piano] button.
The Pedal screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “FC1 Func.”
4.
Use the [-] [+] buttons to select the pedal
function.
Changing How the Pedals Work
Setting
Description
Damper
Sets function to damper pedal.
Soft
Sets function to soft pedal.
Sostenuto
Sets function to sostenuto pedal.
Expression
Allows control of the volume.
You will find it convenient to connect
a separately sold expression pedal
(EV-5).
You cannot change volume of the
Session Partner or recorder.
Song Play
You can play/stop the song by
pressing the pedal instead of pressing
[Play] button.
Audio Key Sw
Audio Key can be switched on by
pressing the pedal instead of pressing
[Audio Key] button.
Session Sw
You can start/stop Session Partner by
pressing the pedal instead of pressing
[Session Partner] button.
Leading Bass
Allows control the on/off of leading
bass function*. It is turned on while
having stepped on the pedal.
Effect Sw
Effects can be switched on/off by
pressing the pedal instead of pressing
the [Multi Effects] button.
When effect type is rotary, you can
control the slow/fast of spinning.
Bend Up
Pitch rises by pressing the pedal.
Bend Down
Pitch lowers by pressing the pedal.
Modulation
Vibrato is added by pressing the
pedal.
NOTE
NOTE
NOTE
NOTE
NOTE
FP-7-e.book 118 ページ 2007年7月12日 木曜日 午後3時47分