User Manual
Table Of Contents
- Introduction
- Contents
- Main Features
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Songs
- Performing
- Performing with a Variety of Sounds
- Simulating the Way that Sounds are Created on an Organ (Tone Wheel)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Adding a Spinning Sound to Organ Tones (Rotary Effect)
- Transposing the Key of the Keyboard or Song Playback (Transpose)
- Performing with the Metronome
- Adding Liveliness to the Sound (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Performing with Audio Files (Audio Key)
- Creating a Piano Sound to Your Taste (Piano Designer)
- Playing Along with Rhythms
- What is Session Partner?
- Performing Along with Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing with the Chord Progression Specified in the Left Hand (Chord Progression Off)
- Changing the Rhythm Pattern (Original/Variation)
- Recording the Chord Progression
- Saving Your Favorite Performance Settings
- Recording
- Saving a Performance
- Various Settings
- Connecting Other Equipment
- Appendices
119
Various Settings
Changing the Works of the Soft Pedal
(FC2)
When the instrument is turned on, this is set to function as a
soft pedal.
1.
Press the [Function] button.
2.
Press the [E.Piano] button.
The Pedal screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “FC2 Func.”
4.
Use the [-] [+] buttons to select the pedal
function.
Here’s how to select the effect that will be applied when you
press the [Multi Effects] button.
1.
Press the [Function] button.
2.
Press the [Multi Effects] button.
The Effects screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Type.”
fig.d-EfxType.eps
4.
Use the [-] [+] buttons to select the effect type.
For details on the effect types and the settings for
each effect, refer to “Effects List” (p. 172).
Editing the Effect Settings in Detail
You can make detailed changes for each effect, such as
adjusting the effect depth.
5.
Select the item that you want to edit.
While holding down the [Display] button, use the [-] [+]
buttons to select the item that you want to edit (the
second and third lines from the top in the Effects screen).
The item in the second or third line from the top of the
Effects screen can be changed by holding down the
[Multi Effects] button and using the [-] [+] buttons,
without your having to open this screen.
6.
Use the [-] [+] buttons to edit the setting.
Effect Settings
Changing the Effect Type
FP-7-e.book 119 ページ 2007年7月12日 木曜日 午後3時47分