User Manual
Table Of Contents
- Introduction
- Contents
- Main Features
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Songs
- Performing
- Performing with a Variety of Sounds
- Simulating the Way that Sounds are Created on an Organ (Tone Wheel)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Adding a Spinning Sound to Organ Tones (Rotary Effect)
- Transposing the Key of the Keyboard or Song Playback (Transpose)
- Performing with the Metronome
- Adding Liveliness to the Sound (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Performing with Audio Files (Audio Key)
- Creating a Piano Sound to Your Taste (Piano Designer)
- Playing Along with Rhythms
- What is Session Partner?
- Performing Along with Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing with the Chord Progression Specified in the Left Hand (Chord Progression Off)
- Changing the Rhythm Pattern (Original/Variation)
- Recording the Chord Progression
- Saving Your Favorite Performance Settings
- Recording
- Saving a Performance
- Various Settings
- Connecting Other Equipment
- Appendices
123
Various Settings
If you’ve connected an external device to the Output jacks and
want to listen to the sound from it, the sound from the external
device may not be loud enough even if you’ve turned the FP-
7’s volume knob to the maximum position. In such cases, you
can adjust the master gain setting as follows.
Adjusting the master gain will also affect the volume of the
internal speakers and headphones.
The sound may distort if you increase the volume
excessively.
1.
Press the [Function] button.
2.
Press the [Reverb] button.
The System screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Master Gain.”
4.
Use the [-] [+] buttons to change the setting.
You can make fine, detailed changes to the equalizer settings.
Before you make detailed adjustments to the equalizer
settings, select the equalizer type that you want to edit (p. 58).
1.
Press the [Function] button.
2.
Press the [Equalizer] button.
The Equalizer screen will appear.
There are three Equalizer screens.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select the item you want to
edit.
4.
Use the [-] [+] buttons to change the setting.
The FP-7 remembers the settings even while its power
is turned off.
Adjusting the Volume (Master Gain)
Setting
-10 dB–0 dB–10 dB
NOTE
Equalizer Settings
Changing the Equalizer Settings
FP-7-e.book 123 ページ 2007年7月12日 木曜日 午後3時47分