User Manual
Table Of Contents
- Introduction
- Contents
- Main Features
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Songs
- Performing
- Performing with a Variety of Sounds
- Simulating the Way that Sounds are Created on an Organ (Tone Wheel)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Adding a Spinning Sound to Organ Tones (Rotary Effect)
- Transposing the Key of the Keyboard or Song Playback (Transpose)
- Performing with the Metronome
- Adding Liveliness to the Sound (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Performing with Audio Files (Audio Key)
- Creating a Piano Sound to Your Taste (Piano Designer)
- Playing Along with Rhythms
- What is Session Partner?
- Performing Along with Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing with the Chord Progression Specified in the Left Hand (Chord Progression Off)
- Changing the Rhythm Pattern (Original/Variation)
- Recording the Chord Progression
- Saving Your Favorite Performance Settings
- Recording
- Saving a Performance
- Various Settings
- Connecting Other Equipment
- Appendices
129
Various Settings
This sets session partner Intro and Ending on or off. When set
to “Off,” pressing the [Session Partner] button causes the Intro
and Ending not to be played.
1.
Press the [Function] button.
2.
Press the [Session Partner] button.
The Session Partner screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Intro/Ending.”
4.
Use the [-] [+] buttons to change the setting.
Here’s how to select the chord progression pattern for the
currently selected rhythm used when Session Partner plays.
1.
Press the [Function] button.
2.
Press the [Session Partner] button.
The Session Partner screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Chord Prog.”
4.
Use the [-] [+] buttons to change the setting.
“User Chord” is a chord progression pattern you
yourself recorded.
“User Chord” is shown only if there is a chord
progression pattern that you created (p. 76).
Session Partner Settings
Setting the Intro and Ending On or Off
Setting Description
On
Pressing the [Session Partner] button causes
the Intro and Ending to be played.
Off
Pressing the [Session Partner] button causes
the Intro and Ending not to be played.
Selecting a Chord Progression Pattern
Setting
User Chord, 1–56
FP-7-e.book 129 ページ 2007年7月12日 木曜日 午後3時47分