User Manual
Table Of Contents
- Introduction
- Contents
- Main Features
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Songs
- Performing
- Performing with a Variety of Sounds
- Simulating the Way that Sounds are Created on an Organ (Tone Wheel)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Adding a Spinning Sound to Organ Tones (Rotary Effect)
- Transposing the Key of the Keyboard or Song Playback (Transpose)
- Performing with the Metronome
- Adding Liveliness to the Sound (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Performing with Audio Files (Audio Key)
- Creating a Piano Sound to Your Taste (Piano Designer)
- Playing Along with Rhythms
- What is Session Partner?
- Performing Along with Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing with the Chord Progression Specified in the Left Hand (Chord Progression Off)
- Changing the Rhythm Pattern (Original/Variation)
- Recording the Chord Progression
- Saving Your Favorite Performance Settings
- Recording
- Saving a Performance
- Various Settings
- Connecting Other Equipment
- Appendices
131
Various Settings
Here’s how you can mute a specific part so that it will not be
heard when the song plays.
You can also make settings so that only a specific part will be
heard.
1.
Press the [Function] button.
2.
Press the Track [1] button.
The Song File screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Part Mute.”
4.
Press the [Display] button.
The following screen appears.
5.
While holding down the [Display] button, use
the [-] [+] buttons to select the part that you
want to mute.
6.
Use the [-] [+] buttons to mute the specified
part.
Muted (silenced) parts are indicated by “M.”
If you use the [-] [+] buttons several times to make the
“S” indication appear, only that part will be played (i.e.,
that part will be soloed).
Settings for Song Playback
Muting a Specific Part (Part Mute)
Most commercially available SMF music files consists of
sixteen channels (parts).
Each channel contains a separate performance; for
example, channel 1 might contain strings and channel 2
bass, with the drums on channel 10. The song data
consists of these sixteen channels of performances, played
back simultaneously.
fig.MelodyChannel.eps
Channel 1
Channel 2
:
Channel 10
Strings
Bass
:
Drums
:
Channel 16
:
Guitar
FP-7-e.book 131 ページ 2007年7月12日 木曜日 午後3時47分