User Manual
Table Of Contents
- Introduction
- Contents
- Main Features
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Songs
- Performing
- Performing with a Variety of Sounds
- Simulating the Way that Sounds are Created on an Organ (Tone Wheel)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Adding a Spinning Sound to Organ Tones (Rotary Effect)
- Transposing the Key of the Keyboard or Song Playback (Transpose)
- Performing with the Metronome
- Adding Liveliness to the Sound (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Performing with Audio Files (Audio Key)
- Creating a Piano Sound to Your Taste (Piano Designer)
- Playing Along with Rhythms
- What is Session Partner?
- Performing Along with Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing with the Chord Progression Specified in the Left Hand (Chord Progression Off)
- Changing the Rhythm Pattern (Original/Variation)
- Recording the Chord Progression
- Saving Your Favorite Performance Settings
- Recording
- Saving a Performance
- Various Settings
- Connecting Other Equipment
- Appendices
136
Various Settings
Connecting the FP-7 to a V-LINK compatible image device
allows you to control the images with the FP-7.
To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and
turn off the power on all devices before making any
connections.
V-LINK
V-LINK ( ) is functionality promoted by Roland
that allows linked performance of music and visual material.
By using V-LINK-compatible video equipment, visual effects
can be easily liked to, and made part of the expressive
elements of a performance.
How to Use the V-LINK
1.
Hold down the [Sound Control] button and
press the [Equalizer] button.
The FP-7 switches to Image Control mode.
A V-LINK symbol will appear in the screen.
You can control images using the twelve keys at the left
end of the keyboard.
fig.V-Link.eps
While V-LINK is switched on, no sound is produced
when you press any of the twelve keys at the left end
of the keyboard.
To deactivate the V-LINK function, hold down the [Sound
Control] button and press the [Equalizer] button.
In some cases, when USB memory is connected to the external
memory connector, it may take longer for data to be loaded,
or data may fail to be loaded successfully. If this occurs, you
may be able to solve the problem by changing the external
memory setting.
1.
Press the [Function] button.
2.
Press the [Reverb] button.
The System screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “External Memory.”
fig.d-Tuning.eps
4.
Use the [-] [+] buttons to change the setting.
5.
Turn on the power once again.
Using the V-LINK Function
NOTE
A0–A 1 (lowest twelve keys)
NOTE
Changing the External Memory Setting
Setting
Mode1, Mode2
FP-7-e.book 136 ページ 2007年7月12日 木曜日 午後3時47分