User Manual
Table Of Contents
- Introduction
- Contents
- Main Features
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Songs
- Performing
- Performing with a Variety of Sounds
- Simulating the Way that Sounds are Created on an Organ (Tone Wheel)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Adding a Spinning Sound to Organ Tones (Rotary Effect)
- Transposing the Key of the Keyboard or Song Playback (Transpose)
- Performing with the Metronome
- Adding Liveliness to the Sound (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Performing with Audio Files (Audio Key)
- Creating a Piano Sound to Your Taste (Piano Designer)
- Playing Along with Rhythms
- What is Session Partner?
- Performing Along with Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing with the Chord Progression Specified in the Left Hand (Chord Progression Off)
- Changing the Rhythm Pattern (Original/Variation)
- Recording the Chord Progression
- Saving Your Favorite Performance Settings
- Recording
- Saving a Performance
- Various Settings
- Connecting Other Equipment
- Appendices
80
Saving Your Favorite Performance Settings
You can use the [Registration] button to store the currently selected buttons and Session
Partner settings. You can also use the [Registration] button and [1]–[7] buttons to recall
the settings you’ve stored. If you have certain combinations of Session Partner settings
and tones that you use frequently, you will find it convenient to save them as registrations.
The FP-7 lets you store twenty-eight different sets of performance settings.
The recommended settings were stored in the FP-7 when it shipped from the factory.
Registration from 7-1 to 7-4 include the “Basic Registration.” Use this when creating
registration from scratch.
For details on the settings that are saved as a registration, refer to “Settings Stored in a
Registration” (p. 176).
fig.Panel-RegistSave.eps
Specifying the Storage Destination for the Registration
1.
Make the desired Session Partner settings and tone settings.
2.
Hold down the [Registration] button and press one of the [1]–[7] buttons,
then press the [-] [+] buttons to which you want to assign the settings.
A screen like the following will appear when you take your finger off the [Registration] button.
fig.d-Regist.eps
While this screen is displayed, you can hold down the [Display] button and press the
[-] button to select the write-destination registration number. At this time you can also
use the [-] [+] buttons to change the write-destination number.
Storing Your Performance Settings (Registration)
FP-7-e.book 80 ページ 2007年7月12日 木曜日 午後3時47分