User Manual
Table Of Contents
- Introduction
- Contents
- Main Features
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Songs
- Performing
- Performing with a Variety of Sounds
- Simulating the Way that Sounds are Created on an Organ (Tone Wheel)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Changing the Volume Balance for Dual Play and Split Play
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Adding a Spinning Sound to Organ Tones (Rotary Effect)
- Transposing the Key of the Keyboard or Song Playback (Transpose)
- Performing with the Metronome
- Adding Liveliness to the Sound (Sound Control)
- Changing the Tonal Quality (Equalizer)
- Performing with Audio Files (Audio Key)
- Creating a Piano Sound to Your Taste (Piano Designer)
- Playing Along with Rhythms
- What is Session Partner?
- Performing Along with Session Partner
- Selecting a Rhythm
- Changing a Rhythm’s Tempo
- Selecting a Rhythm’s Chord Progression
- Performing with the Chord Progression Specified in the Left Hand (Chord Progression Off)
- Changing the Rhythm Pattern (Original/Variation)
- Recording the Chord Progression
- Saving Your Favorite Performance Settings
- Recording
- Saving a Performance
- Various Settings
- Connecting Other Equipment
- Appendices
85
Saving Your Favorite Performance Settings
Here’s how an entire set of registrations you saved in internal memory or USB memory
can be loaded back to the [Registration] button.
Note that when you load a registration set, all of the settings that were stored at the
[Registration] button will be overwritten and lost.
If you want to load a registration set that was saved on USB memory, connect your
USB memory to the external memory connector. For more about handling USB
memory, refer to “Using USB Memory” (p. 23).
fig.Panel-RegistLoad.eps
1.
Press the [Function] button.
2.
Press the Track [R] button.
The Registration File screen appears.
3.
While holding down the [Display] button, use the [-] [+] buttons to select
“Load.”
fig.d-Registload.eps
4.
Press the [Display] button.
The Load Registration screen appears.
Loading a Registration Set You Saved
NOTE
NOTE
If no registration set has been saved in internal
memory, or if USB memory is not connected, the
“ ” icon will be shown for the Load field.
FP-7-e.book 85 ページ 2007年7月12日 木曜日 午後3時47分