User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Features
- Panel Descriptions
- Setting Up the Kit
- Choosing a Drum Kit
- Playing the Drum Kit
- Creating Your Own Drum Kit
- Playing with the Metronome (Click)
- Playing with a CD, Tape, or MD (Via MIX IN Jack)
- COACH Mode
- Pad Adjustments
- Hi-Hat Control Pedal Adjustment
- Factory Reset (Restoring the Factory Settings)
- About the Pads
- Pad Configuration Possibilities
- Pad and Trigger Settings
- Selecting the Pad Type (Trigger Type)
- Adjusting Pad Sensitivity
- Setting the Minimum Levels for the Pads (Threshold)
- How Playing Dynamics Changes the Volume (Velocity Curve)
- Adjusting the Trigger Signal Detection Time (Scan Time)
- Detecting Trigger Signal Attenuation and Cancelling Incorrect Triggering (Retrigger Cancel)
- Eliminate Crosstalk Between Pads (Crosstalk Cancel)
- Double Triggering Prevention (Mask Time)
- Rim Shots Response (Rim Sensitivity)
- Rim/Edge Dynamic Response (Rim Gain)
- MIDI Settings
- Troubleshooting / Error Messages
- Drum Kit List
- Drum Instrument List
- MIDI Implementation Chart
- Specifications
- Index
10
Panel Descriptions
fig.rear
13.
VOLUME Knob
Adjusts the volume of the TD-3 in both the headphones and
various output jacks.
14.
OUTPUT Jacks (L (MONO), R)
For connecting to your amp or audio system. For monaural
output use the L/MONO jack (p. 13).
15.
TRIGGER INPUT Jacks
For connecting pads, cymbals, and kick triggers (Optional or
those included with the kit) (p. 12). For more detailed
information on each trigger input, refer to
Trigger Inputs and
the Pads You Can Use
(p. 44).
16.
HH CTRL (Hi-Hat Control) Jack
Connect a hi-hat control pedal optional FD-7/FD-6; or FD-8
included with the TD-3Kit. (p. 12)
17.
MIX IN Jack
For connecting CD, MD, cassette player, or other audio source
(p. 34). Sound input to this jack will be output from the
OUTPUT jacks and the PHONES jack.
18.
AC Adaptor Jack
Connect the supplied AC adaptor to this jack (p. 13).
19.
POWER Switch
Turns the power on/off (p. 14).
fig.side
20.
Security Slot ( )
http://www.kensington.com/
21.
MIDI Connectors (IN, OUT)
IN:
For a MIDI source (sequencer, keyboard, or other MIDI
device) to play sounds in the TD-3, or to load data from a
MIDI sequencer.
OUT:
When using the TD-3/pads to play sounds in an
external MIDI sound module, or when saving the TD-3’s data
to a MIDI sequencer.
(p. 60)
22.
PHONES Jack
A pair of stereo headphones can be connected to this jack (p.
13). Connecting the headphones will not mute the output from
the output jacks.
Rear Panel
13 14 15
16171819
Side Panel
20 2221
TD-3_e.book 10 ページ 2005年5月20日 金曜日 午後4時57分