User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Features
- Panel Descriptions
- Setting Up the Kit
- Choosing a Drum Kit
- Playing the Drum Kit
- Creating Your Own Drum Kit
- Playing with the Metronome (Click)
- Playing with a CD, Tape, or MD (Via MIX IN Jack)
- COACH Mode
- Pad Adjustments
- Hi-Hat Control Pedal Adjustment
- Factory Reset (Restoring the Factory Settings)
- About the Pads
- Pad Configuration Possibilities
- Pad and Trigger Settings
- Selecting the Pad Type (Trigger Type)
- Adjusting Pad Sensitivity
- Setting the Minimum Levels for the Pads (Threshold)
- How Playing Dynamics Changes the Volume (Velocity Curve)
- Adjusting the Trigger Signal Detection Time (Scan Time)
- Detecting Trigger Signal Attenuation and Cancelling Incorrect Triggering (Retrigger Cancel)
- Eliminate Crosstalk Between Pads (Crosstalk Cancel)
- Double Triggering Prevention (Mask Time)
- Rim Shots Response (Rim Sensitivity)
- Rim/Edge Dynamic Response (Rim Gain)
- MIDI Settings
- Troubleshooting / Error Messages
- Drum Kit List
- Drum Instrument List
- MIDI Implementation Chart
- Specifications
- Index
18
Playing the Drum Kit
fig.Play-00
• Pressing [INST] allows you to change the instrument (p. 24).
• Pressing [AMBIENCE] switch the Ambience on and off (p. 26).
• Pressing [CLICK] (metronome) starts the metronome (p. 28).
• Press [TEMPO] to adjust the tempo (p. 28).
fig.P-011.e
The following trigger inputs allow you to play
either rim shots and cross stick on the snare pad,
or cymbal edge shots and choking, and other
techniques.
The trigger inputs capable of handling dual
triggering pads/triggers are as follows.
•
SNARE
•
HI-HAT
•
CRASH 1
•
CRASH 2
•
RIDE
Trigger Inputs and Triggering Possibilities
INST TEMPO
AMBIENCE
CLICK
SNARE
HI-HAT
TOM 2
TOM 1 KICK
TOM 3
CRASH1CRASH2
RIDE
Bow
(Head)
Edge
(Rim)
Bow
(Head)
Edge
(Rim)
Bow
(Head)
Edge
(Rim)
Bow
(Head)
Edge
(Rim)
Head
Head
Head
Head
Rim
Head
TD-3_e.book 18 ページ ２００５年５月２０日 金曜日 午後４時５７分