User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Features
- Panel Descriptions
- Setting Up the Kit
- Choosing a Drum Kit
- Playing the Drum Kit
- Creating Your Own Drum Kit
- Playing with the Metronome (Click)
- Playing with a CD, Tape, or MD (Via MIX IN Jack)
- COACH Mode
- Pad Adjustments
- Hi-Hat Control Pedal Adjustment
- Factory Reset (Restoring the Factory Settings)
- About the Pads
- Pad Configuration Possibilities
- Pad and Trigger Settings
- Selecting the Pad Type (Trigger Type)
- Adjusting Pad Sensitivity
- Setting the Minimum Levels for the Pads (Threshold)
- How Playing Dynamics Changes the Volume (Velocity Curve)
- Adjusting the Trigger Signal Detection Time (Scan Time)
- Detecting Trigger Signal Attenuation and Cancelling Incorrect Triggering (Retrigger Cancel)
- Eliminate Crosstalk Between Pads (Crosstalk Cancel)
- Double Triggering Prevention (Mask Time)
- Rim Shots Response (Rim Sensitivity)
- Rim/Edge Dynamic Response (Rim Gain)
- MIDI Settings
- Troubleshooting / Error Messages
- Drum Kit List
- Drum Instrument List
- MIDI Implementation Chart
- Specifications
- Index
24
Creating Your Own Drum Kit
How to assign instruments (sounds) to individual pads or pedals.
When using rim/edge-capable pads, select the sounds separately by hitting either the head (bow if a
Cymbal pad) or rim (edge if a Cymbal pad).
To see the available instruments, refer to “Drum Instrument List” (p. 69).
fig.01-004
1.
Press [INST].
[INST] flashes.
2.
Hit the pad you wish to set.
The trigger indicator for the struck pad lights, and the instrument number appears.
When the rim (edge) is struck, the rim indicator lights up.
3.
Press [+] or [-] to select the instrument.
When holding down [+] and pressing [-] values increase rapidly.
When holding down [-] and pressing [+] values decrease rapidly.
4.
Repeat Steps
2
and
3
to make the settings for other pads or pedals.
5.
When you’re finished, press [DRUM KIT]; the [INST] light goes off.
Do not turn off the power without the [INST] light having gone out. Otherwise you will lose
the changes you have just made.
Selecting Sounds [INST]
31
TD-3_e.book 24 ページ 2005年5月20日 金曜日 午後4時57分