User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Features
- Panel Descriptions
- Setting Up the Kit
- Choosing a Drum Kit
- Playing the Drum Kit
- Creating Your Own Drum Kit
- Playing with the Metronome (Click)
- Playing with a CD, Tape, or MD (Via MIX IN Jack)
- COACH Mode
- Pad Adjustments
- Hi-Hat Control Pedal Adjustment
- Factory Reset (Restoring the Factory Settings)
- About the Pads
- Pad Configuration Possibilities
- Pad and Trigger Settings
- Selecting the Pad Type (Trigger Type)
- Adjusting Pad Sensitivity
- Setting the Minimum Levels for the Pads (Threshold)
- How Playing Dynamics Changes the Volume (Velocity Curve)
- Adjusting the Trigger Signal Detection Time (Scan Time)
- Detecting Trigger Signal Attenuation and Cancelling Incorrect Triggering (Retrigger Cancel)
- Eliminate Crosstalk Between Pads (Crosstalk Cancel)
- Double Triggering Prevention (Mask Time)
- Rim Shots Response (Rim Sensitivity)
- Rim/Edge Dynamic Response (Rim Gain)
- MIDI Settings
- Troubleshooting / Error Messages
- Drum Kit List
- Drum Instrument List
- MIDI Implementation Chart
- Specifications
- Index
28
Playing with the Metronome
(Click)
fig.01-010
1.
Press [CLICK] to turn ON and OFF.
[CLICK] lights, and the click sound begins to play.
fig.01-010a
1.
Press [TEMPO].
2.
Press [+] or [-] to raise or lower the tempo by one BPM (Beats Per Minute).
When holding down [+] and pressing [-] values increase a step from the current tempo setting.
When holding down [-] and pressing [+] values decrease a step from the current tempo setting.
TEMPO:
20–260
3.
When you’re finished, press [DRUM KIT] to return the drum kit number to the display.
Do not turn off the power without returning to the drum kit number display. Otherwise you
will lose the changes you have just made.
Starting and Stopping the Metronome On/Off [CLICK]
Tempo Adjustment [TEMPO]
1
213
TD-3_e.book 28 ページ 2005年5月20日 金曜日 午後4時57分