User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Features
- Panel Descriptions
- Setting Up the Kit
- Choosing a Drum Kit
- Playing the Drum Kit
- Creating Your Own Drum Kit
- Playing with the Metronome (Click)
- Playing with a CD, Tape, or MD (Via MIX IN Jack)
- COACH Mode
- Pad Adjustments
- Hi-Hat Control Pedal Adjustment
- Factory Reset (Restoring the Factory Settings)
- About the Pads
- Pad Configuration Possibilities
- Pad and Trigger Settings
- Selecting the Pad Type (Trigger Type)
- Adjusting Pad Sensitivity
- Setting the Minimum Levels for the Pads (Threshold)
- How Playing Dynamics Changes the Volume (Velocity Curve)
- Adjusting the Trigger Signal Detection Time (Scan Time)
- Detecting Trigger Signal Attenuation and Cancelling Incorrect Triggering (Retrigger Cancel)
- Eliminate Crosstalk Between Pads (Crosstalk Cancel)
- Double Triggering Prevention (Mask Time)
- Rim Shots Response (Rim Sensitivity)
- Rim/Edge Dynamic Response (Rim Gain)
- MIDI Settings
- Troubleshooting / Error Messages
- Drum Kit List
- Drum Instrument List
- MIDI Implementation Chart
- Specifications
- Index
33
Playing with the Metronome (Click)
1.
Press [EDIT].
[EDIT] flashes.
2.
Press [EDIT] a few times until the CLICK LEVEL indicator is lit.
fig.01-011
Hold down [EDIT] and press [-] to have the indicators light in the reverse order of that when
only [EDIT] is pressed.
3.
Press [+] or [-] to adjust the volume of the click sound.
CLICK LEVEL:
0–15
* If you want to hear the metronome sound, press [CLICK].
4.
Press [EDIT] to continue editing other settings.
5.
When you’re finished, press [DRUM KIT] to display the drum kit number.
Do not turn off the power without returning to the drum kit number display. Otherwise you
will lose the changes you have just made.
Volume Adjustment [CLICK LEVEL]
TD-3_e.book 33 ページ ２００５年５月２０日 金曜日 午後４時５７分