User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Features
- Panel Descriptions
- Setting Up the Kit
- Choosing a Drum Kit
- Playing the Drum Kit
- Creating Your Own Drum Kit
- Playing with the Metronome (Click)
- Playing with a CD, Tape, or MD (Via MIX IN Jack)
- COACH Mode
- Pad Adjustments
- Hi-Hat Control Pedal Adjustment
- Factory Reset (Restoring the Factory Settings)
- About the Pads
- Pad Configuration Possibilities
- Pad and Trigger Settings
- Selecting the Pad Type (Trigger Type)
- Adjusting Pad Sensitivity
- Setting the Minimum Levels for the Pads (Threshold)
- How Playing Dynamics Changes the Volume (Velocity Curve)
- Adjusting the Trigger Signal Detection Time (Scan Time)
- Detecting Trigger Signal Attenuation and Cancelling Incorrect Triggering (Retrigger Cancel)
- Eliminate Crosstalk Between Pads (Crosstalk Cancel)
- Double Triggering Prevention (Mask Time)
- Rim Shots Response (Rim Sensitivity)
- Rim/Edge Dynamic Response (Rim Gain)
- MIDI Settings
- Troubleshooting / Error Messages
- Drum Kit List
- Drum Instrument List
- MIDI Implementation Chart
- Specifications
- Index
49
Pad Configuration Possibilities
TD-3Kit with two CY-8s (+ 2 MDY-10Us)
fig.Expand-2.e
This setup shows a TD-3Kit with two CY-8s (+ 2 MDY-10Us) for a total of four cymbals.
Connecting the cymbal pads to the TOM 1–3 trigger input jacks allows four or more cymbals to be used.
You can use four toms by connecting a pad to the TOM 1–3 and/or CRASH 2/CRASH 1
trigger input jack.
Set the trigger type for each trigger input to match the pad or cymbal used (p. 50).
Two Toms and Four Cymbals
TRIGGER INPUT jacks
CRASH2
CY-8
CY-8
CRASH1
TOM 3
PD-8
PD-8
TOM 1
PD-8
HI-HAT
PD-8
SNARE
KICK
KD-8
FD-8
HH CTRL
TD-3
RIDE
CY-8
CY-8
(CRASH3)
TD-3_e.book 49 ページ ２００５年５月２０日 金曜日 午後４時５７分