User Manual

ManualsBrandsRoland ManualsControl UnitsTD3 Sound module - SOUND MODULE

Table Of Contents

USING THE UNIT SAFELY
IMPORTANT NOTES
Contents
Features
Panel Descriptions
- Top Panel
- Rear Panel
- Side Panel
Setting Up the Kit
- Mounting the TD-3 on the Stand
- Connecting the Pads and the Pedals
- Connecting Headphones, Audio Equipment, Amps, and Other Gear
- Turning On/Off the Power
  - Turning Off the Power
Choosing a Drum Kit
- Hearing What the Kits Sound Like (Preview)
Playing the Drum Kit
- Trigger Inputs and Triggering Possibilities
- Playing the Pads
- Hi-Hat Control Pedal
Creating Your Own Drum Kit
- Choosing a Drum Kit [DRUM KIT]
- Selecting Sounds [INST]
- Instrument Volume & Pan [LEVEL/PAN]
- Ambience Settings [AMBIENCE]
  - Switching Ambience On/Off
  - Selecting the Ambience Type
- Copying a Drum Kit [KIT COPY]
Playing with the Metronome (Click)
- Starting and Stopping the Metronome On/Off [CLICK]
- Tempo Adjustment [TEMPO]
- Setting the Time Signature [BEAT]
- Selecting a Rhythm Type [RHYTHM TYPE]
- Selecting the Click Sound [CLICK INST]
- Volume Adjustment [CLICK LEVEL]
Playing with a CD, Tape, or MD (Via MIX IN Jack)
COACH Mode
- Setting Procedure
- Accuracy and Timing Exercises
- Endurance and Stamina Exercises
  - Gradual Up/Down—Tempo Increase/Decrease Exercise
  - Step Up/Down—Tempo Increase/Decrease in Steps
- Voice “Count In” / Visual Measure Counter
  - Count In and Measure Counter
Pad Adjustments
- Adjusting Pad Sensitivity [PAD SENS]
- Eliminate Crosstalk Between Pads [XTALK CANCEL]
Hi-Hat Control Pedal Adjustment
- Adjusting the Hi-Hat’s Foot Closed Level
Factory Reset (Restoring the Factory Settings)
About the Pads
- Trigger Inputs and the Pads You Can Use
- Playing the Pads
Pad Configuration Possibilities
- Three Toms and Three Cymbals
- Two Toms and Four Cymbals
Pad and Trigger Settings
- Selecting the Pad Type (Trigger Type)
- Adjusting Pad Sensitivity
- Setting the Minimum Levels for the Pads (Threshold)
- How Playing Dynamics Changes the Volume (Velocity Curve)
- Adjusting the Trigger Signal Detection Time (Scan Time)
- Detecting Trigger Signal Attenuation and Cancelling Incorrect Triggering (Retrigger Cancel)
- Eliminate Crosstalk Between Pads (Crosstalk Cancel)
- Double Triggering Prevention (Mask Time)
- Rim Shots Response (Rim Sensitivity)
- Rim/Edge Dynamic Response (Rim Gain)
MIDI Settings
- About MIDI
  - MIDI Connectors
- MIDI Note Number for Each Pad [NOTE#]
- When Only Using as a MIDI Controller (Local Control)
- Saving Data to an External MIDI Device (Bulk Dump)
  - Loading Data to the TD-3
- Using MIDI
Troubleshooting / Error Messages
- Troubleshooting
- Error Messages
Drum Kit List
Drum Instrument List
MIDI Implementation Chart
Specifications
Index

Panel Descriptions

fig.front

Display

The screen displays the drum kit number, tempo, parameter

settings, and other such information.

Trigger Indicators

The indicator for the struck pad lights up.

When [EDIT] is pressed, the indicator corresponding to the

selected parameter lights up.

Rim Indicator

This trigger indicator simultaneously lights when you strike

the rim or edge.

AMBIENCE Button

Turns the ambience (Room Reverberation) on and off (p. 26).

CLICK Button

Turns the metronome (click) on/off.

DRUM KIT Button

Displays the drum kit number.

INST Button

Displays the instrument number for the pad being played.

LEVEL/PAN Button

Each press of this button alternates between level (volume)

and pan (position in the stereo field—left/right).

TEMPO Button

Displays the tempo settings of the metronome.

10.

COACH Button

This switches the TD-3 to Coach mode (p. 35).

11.

EDIT Button

Use this for setting the kit parameters (p. 22), click parameters

(p. 28) and pad parameters (p. 40, p. 50, p. 60).

12.

+/- Button

These are used to make changes in the settings values.

Top Panel

12 543

6 7 8 9 10 11 12

TD-3_e.book 9 ページ２００５年５月２０日　金曜日　午後４時５７分