User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Introduction
- Contents
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Demo Songs
- Performing
- Performing with a Variety of Sounds
- Adjusting the Piano Sound to Your Taste (Piano Designer)
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Spatial Depth to the Sound (3D Sound Control)
- Adding Liveliness to the Sound (Dynamics Sound Control)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Changing the Key of the Keyboard (Key Transpose)
- Dividing the Keyboard for Two-person Performance (Twin Piano)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Basic Operation in Function Mode
- Tuning Settings
- Equalizer Settings
- Song Playback Settings
- Changing the CD Settings
- Metronome Setting
- Keyboard Settings
- Pedal Settings
- MIDI Settings
- Other Settings
- Using the V-LINK Function (V-LINK)
- Specifying the V-LINK Transmission Channel
- Changing the USB Driver Settings (USB Driver)
- Changing the External Memory Setting (Ext. Memory Mode)
- Adjusting the Volume (Master Gain)
- Changing How Grand Space is Applied (3D Mode)
- Changing the Parts Assigned to the Track Buttons During SMF Playback (Track Assign)
- Switching On/Off the Display of Lyrics (Lyrics)
- Switching VIMA TUNES Recommended Tones (Recommended Tone)
- Changing the Language Displayed in the Screen (Language)
- Remembering the Settings (Memory Backup)
- Restoring the Settings to the Factory Condition (Factory Reset)
- Disabling the Buttons (Panel Lock)
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- Parameters Stored in Memory Backup
- Music Files That the LX-10 Can Use
- MIDI Implementation Chart
- Main Specifications
- Index
21
Before You Play
Turning the Power Off
1.
Turn the [Volume] knob all the way toward
the left to minimize the volume.
fig.VolumeMin-e.eps
2.
Press the [Power] switch.
The screen goes blank and the power is turned off.
fig.PowerOff-e.eps
945
If you need to turn off the power completely, first turn
off the [Power] switch, then unplug the power cord
from the power outlet. Refer to “Power Supply” (p. 11).
Here’s how to adjust the volume of your keyboard playing or the
playback volume of an internal song or USB memory song.
If headphones are connected, use the [Volume] knob to adjust
the headphone volume.
1.
Turn the [Volume] knob to adjust the overall
volume.
Adjust the volume while you play the keyboard to produce
sound.
Turning the knob toward the right will increase the volume,
and turning it toward the left will decrease the volume.
2.
Turn the [Brilliance] knob to adjust the
brightness of the sound.
Turning the knob toward the right will make the sound
brighter, and turning it toward the left will make the sound
more mellow.
fig.VolBri-e.eps
You can adjust the brightness of the LX-10’s display.
fig.Contrast-e.eps
1.
To adjust the brightness, turn the [Display
Contrast] knob located at the right of the
front panel.
Cautions Regarding the LCD Display
• You may notice something like vertical lines in the screen,
but this is due to the characteristics of a liquid crystal display,
and is not a malfunction.
You can minimize this by using the [Display Contrast] knob
to adjust the brightness of the screen.
• The brightness may be affected by the temperature.
Adjusting the Sound’s
Volume and Brilliance
OFF
Upward
position
NOTE
Min Max
Mellow
Bright
Adjusting the Brightness of
the Display
LX-10_e.book 21 ページ 2009年2月13日 金曜日 午前10時39分