User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Introduction
- Contents
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Demo Songs
- Performing
- Performing with a Variety of Sounds
- Adjusting the Piano Sound to Your Taste (Piano Designer)
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Spatial Depth to the Sound (3D Sound Control)
- Adding Liveliness to the Sound (Dynamics Sound Control)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Changing the Key of the Keyboard (Key Transpose)
- Dividing the Keyboard for Two-person Performance (Twin Piano)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Basic Operation in Function Mode
- Tuning Settings
- Equalizer Settings
- Song Playback Settings
- Changing the CD Settings
- Metronome Setting
- Keyboard Settings
- Pedal Settings
- MIDI Settings
- Other Settings
- Using the V-LINK Function (V-LINK)
- Specifying the V-LINK Transmission Channel
- Changing the USB Driver Settings (USB Driver)
- Changing the External Memory Setting (Ext. Memory Mode)
- Adjusting the Volume (Master Gain)
- Changing How Grand Space is Applied (3D Mode)
- Changing the Parts Assigned to the Track Buttons During SMF Playback (Track Assign)
- Switching On/Off the Display of Lyrics (Lyrics)
- Switching VIMA TUNES Recommended Tones (Recommended Tone)
- Changing the Language Displayed in the Screen (Language)
- Remembering the Settings (Memory Backup)
- Restoring the Settings to the Factory Condition (Factory Reset)
- Disabling the Buttons (Panel Lock)
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- Parameters Stored in Memory Backup
- Music Files That the LX-10 Can Use
- MIDI Implementation Chart
- Main Specifications
- Index
27
Listening to Demo Songs
Here’s how you can listen to the differences in various sounds created by the Piano Designer
function (p. 29).
1.
Hold down the [Key Touch] button and press the [File] button.
The indicators for the Tone, [Twin Piano], and [Piano Designer] buttons flash.
The following appears in the display.
fig.d-Demo.eps
You can’t play back the demo songs if your recorded performance has not been saved. Either press
the [ ] button to erase your performance (p. 26), or press [ ] button and save your recorded
performance (p. 73).
2.
Press the [Piano Designer] button.
Several of the tone buttons at the left and the [Piano Designer] button will flash.
The piano designer demo screen appears.
fig.d-DemoPnoDsgn1.eps
3.
Use the [
▲
] [
▼
] buttons to select the demo you want to hear.
4.
Press the flashing tone button.
The demo corresponding to the button you pressed will play.
fig.d-DemoPnoDsgn2.eps
By repeating steps 3 and 4, you can listen to other demos.
5.
Press the [Key Touch] button or the [File] button to exit Demo mode.
The indicators return to their previous state.
Listening to Piano Designer Demo Songs
NOTE
LX-10_e.book 27 ページ 2009年2月13日 金曜日 午前10時39分