User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Introduction
- Contents
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Demo Songs
- Performing
- Performing with a Variety of Sounds
- Adjusting the Piano Sound to Your Taste (Piano Designer)
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Spatial Depth to the Sound (3D Sound Control)
- Adding Liveliness to the Sound (Dynamics Sound Control)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Changing the Key of the Keyboard (Key Transpose)
- Dividing the Keyboard for Two-person Performance (Twin Piano)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Basic Operation in Function Mode
- Tuning Settings
- Equalizer Settings
- Song Playback Settings
- Changing the CD Settings
- Metronome Setting
- Keyboard Settings
- Pedal Settings
- MIDI Settings
- Other Settings
- Using the V-LINK Function (V-LINK)
- Specifying the V-LINK Transmission Channel
- Changing the USB Driver Settings (USB Driver)
- Changing the External Memory Setting (Ext. Memory Mode)
- Adjusting the Volume (Master Gain)
- Changing How Grand Space is Applied (3D Mode)
- Changing the Parts Assigned to the Track Buttons During SMF Playback (Track Assign)
- Switching On/Off the Display of Lyrics (Lyrics)
- Switching VIMA TUNES Recommended Tones (Recommended Tone)
- Changing the Language Displayed in the Screen (Language)
- Remembering the Settings (Memory Backup)
- Restoring the Settings to the Factory Condition (Factory Reset)
- Disabling the Buttons (Panel Lock)
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- Parameters Stored in Memory Backup
- Music Files That the LX-10 Can Use
- MIDI Implementation Chart
- Main Specifications
- Index
30
Performing
Display
Parameter Value Description
Lid Open/Close Lid 0–6
Adjusts the extent to which the lid of the grand piano is open.
The sound will become more mellow as you close the lid of the piano in the screen.
The sound will become brighter as you open the lid of the piano in the screen.
Keyboard
Key Touch
Fixed, Super Light,
Light, Medium,
Heavy, Super
Heavy
Adjusts the touch sensitivity of the keyboard.
If you select “Fixed,” notes will sound at a uniform volume regardless of how
strongly you play the keyboard.
Key Touch Offset
-10–0–9
This lets you make further detailed adjustments to the keyboard sensitivity as
appropriate for the strength of your fingers.
Higher settings will produce a heavier playing feel.
Hammer Response
Off, 1–10
This adjusts the time from when you play a key until the piano sound is heard.
Higher settings will produce slower response. If this is OFF, the sound will be heard
as soon as you strike the key, regardless of how strongly you strike it.
Hammer Noise -2–0–+2
This adjusts the sound produced when the hammer of an acoustic piano strikes the
string. Higher settings will produce a louder sound of the hammer striking the
string.
Tuning
Master Tuning
415.3–440.0–
466.2 Hz
This adjusts the LX-10s standard pitch (the pitch of the middle A note).
Temperament
Equal, Just (Major),
Just (Minor),
Arabic, Kirnberger,
Meantone,
Pythagorean,
Werkmeister
You can play classical styles such as Baroque using historic temperaments (tuning
methods).
Most modern songs are composed for and played in equal temperament, the most
common tuning in use today. But at one time, there were a wide variety of other
tuning systems in existence.
By playing in the temperament that was in use when a composition was created,
you can experience the sonorities of chords originally intended for that song.
For details, refer to “Temperaments” (p. 31).
Tonic
C–B
When playing with tuning other than equal temperament, you need to specify the
tonic note for tuning the song to be performed (that is, the note that corresponds
to C for a major key or to A for a minor key).
If you choose an equal temperament, there’s no need to select a tonic note.
Stretch Tuning
Off, Preset, User
(User: -50–0–+50)
This lets you specify the amount of “stretched tuning,” a tuning method specifically
for pianos, in which the high range is tuned slightly sharper, and the low range is
tuned slightly flatter.
If you select “Preset,” a standard tuning curve created for the LX-10 will be used.
If you select “User,” you’ll be able to edit the stretched tuning yourself. Play the key
whose pitch you want to adjust, then use the [-] [+] buttons to adjust its pitch. (If
you adjust the “Preset” setting, the selection will change to “User.”)
Resonance
Damper
Resonance
Off, 1–10
This adjusts the damper resonance of the acoustic piano sound (the sympathetic
vibration produced in strings other than those actually played when you press the
damper pedal).
Higher settings will make the sympathetic vibration louder.
Damper Noise
Off, 1–10
This adjusts the damper noise of the acoustic piano sound (the sound of the
damper releasing the strings when you press the damper pedal).
Duplex Scale
Off, 1–10
This adjusts the sympathetic vibrations of an acoustic piano’s Duplex Scale (p. 31).
Higher settings will make the sympathetic vibration louder.
String Resonance
Off, 1–10
This adjusts the string resonance of the acoustic piano sound (the sympathetic
vibrations of strings for previously played notes that occur when you play another
note).
Higher settings will make the sympathetic vibration louder.
Key Off Resonance
Off, 1–10
This adjusts sympathetic vibrations such as an acoustic piano’s key-off sound (the
subtle sound that occurs when you release a note).
Higher settings will make the sympathetic vibration louder.
LX-10_e.book 30 ページ 2009年2月13日 金曜日 午前10時39分