User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Introduction
- Contents
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Demo Songs
- Performing
- Performing with a Variety of Sounds
- Adjusting the Piano Sound to Your Taste (Piano Designer)
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Spatial Depth to the Sound (3D Sound Control)
- Adding Liveliness to the Sound (Dynamics Sound Control)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Changing the Key of the Keyboard (Key Transpose)
- Dividing the Keyboard for Two-person Performance (Twin Piano)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Basic Operation in Function Mode
- Tuning Settings
- Equalizer Settings
- Song Playback Settings
- Changing the CD Settings
- Metronome Setting
- Keyboard Settings
- Pedal Settings
- MIDI Settings
- Other Settings
- Using the V-LINK Function (V-LINK)
- Specifying the V-LINK Transmission Channel
- Changing the USB Driver Settings (USB Driver)
- Changing the External Memory Setting (Ext. Memory Mode)
- Adjusting the Volume (Master Gain)
- Changing How Grand Space is Applied (3D Mode)
- Changing the Parts Assigned to the Track Buttons During SMF Playback (Track Assign)
- Switching On/Off the Display of Lyrics (Lyrics)
- Switching VIMA TUNES Recommended Tones (Recommended Tone)
- Changing the Language Displayed in the Screen (Language)
- Remembering the Settings (Memory Backup)
- Restoring the Settings to the Factory Condition (Factory Reset)
- Disabling the Buttons (Panel Lock)
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- Parameters Stored in Memory Backup
- Music Files That the LX-10 Can Use
- MIDI Implementation Chart
- Main Specifications
- Index
54
Playing Back Songs
When playing back internal songs or external memory songs, you can select the
performance parts that will play.
You can also practice each hand separately while playing along with the song.
You can’t play back (mute) individual parts for audio data or a song from a music CD.
fig.Panel-TrackMute-e.eps
1.
Select the song that you want to play (p. 50).
2.
Press the [ ] button to play the song.
3.
Select the part that you don’t want to play back.
Press the Track [Left] button, Track [Right] button, or the Track [Accomp] button.
The button you pressed will go out, and the corresponding part will no longer be heard.
Temporarily silencing a specific part in this way is called “muting.”
For example, if you want to practice the right-hand part, press the Track [Right] button so its
illumination is turned off. When you play back the song, the right-hand part will not play.
You can select the part that will be muted when you press the Track [Accomp] button and turn off its
light. Please refer to p. 82.
If you mute the accompaniment part before initiating playback, you can skip the intro.
4.
If you again press the button you selected in step 3, so the button is lit,
the sound of that part will be heard.
Mute settings will be cleared when you switch songs.
Listening to Each Part Separately
NOTE
The performance data is assigned to the Track buttons as shown below.
fig.TrackButtons-e.eps
The left-hand performance is assigned to the Track [Left]
button, the right-hand performance is assigned to the
Track [Right] button, and other performance is assigned to
the Track [Accomp] button. “Tracks” are areas in which
music files is held, and buttons [Left], [Right], and [Accomp]
are referred to as the “track buttons.”
Some songs don’t include an accompaniment.
If you select one of these songs, the [Accomp] button will not light.
Right-hand
Part
Accompaniment
Part
Left-hand Part
NOTE
LX-10_e.book 54 ページ 2009年2月13日 金曜日 午前10時39分