User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Introduction
- Contents
- USING THE UNIT SAFELY
- Important Notes
- Names of Things and What They Do
- Before You Play
- Listening to Demo Songs
- Performing
- Performing with a Variety of Sounds
- Adjusting the Piano Sound to Your Taste (Piano Designer)
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Spatial Depth to the Sound (3D Sound Control)
- Adding Liveliness to the Sound (Dynamics Sound Control)
- Adding Reverberation to Sounds (Reverb Effect)
- Adding a Variety Effects to the Sound (Effects)
- Changing the Key of the Keyboard (Key Transpose)
- Dividing the Keyboard for Two-person Performance (Twin Piano)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Basic Operation in Function Mode
- Tuning Settings
- Equalizer Settings
- Song Playback Settings
- Changing the CD Settings
- Metronome Setting
- Keyboard Settings
- Pedal Settings
- MIDI Settings
- Other Settings
- Using the V-LINK Function (V-LINK)
- Specifying the V-LINK Transmission Channel
- Changing the USB Driver Settings (USB Driver)
- Changing the External Memory Setting (Ext. Memory Mode)
- Adjusting the Volume (Master Gain)
- Changing How Grand Space is Applied (3D Mode)
- Changing the Parts Assigned to the Track Buttons During SMF Playback (Track Assign)
- Switching On/Off the Display of Lyrics (Lyrics)
- Switching VIMA TUNES Recommended Tones (Recommended Tone)
- Changing the Language Displayed in the Screen (Language)
- Remembering the Settings (Memory Backup)
- Restoring the Settings to the Factory Condition (Factory Reset)
- Disabling the Buttons (Panel Lock)
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- Parameters Stored in Memory Backup
- Music Files That the LX-10 Can Use
- MIDI Implementation Chart
- Main Specifications
- Index
81
Various Settings
You can use the equalizer to modify the tonal character of the
sound by boosting or reducing just the low-frequency or high-
frequency range of the sound.
1.
Hold down the [Effects] button and press the
[3D] button.
2.
Use the [
▲
] [
▼
] buttons to select “Equalizer.”
3.
Press the [ ] button.
The following appears in the display.
fig.d-EQ-Off.eps
4.
Press the [+] button to select “On.”
fig.d-EQ-On.eps
5.
Press the [ ] button.
The equalizer setting screen appears.
fig.d-EQ-Number.eps
6.
Use the [
▲
] [
▼
] buttons to select an item.
fig.d-EQ-Param.eps
7.
Use the [-] [+] buttons to change the setting
for the selected item.
The sound may distort if you raise the gain value. If so,
lower the master gain (p. 88).
Equalizer Settings
Changing the Equalizer Settings
(Equalizer)
Item
Value Description
EQ Number
1–4
Selects a set of preset
equalizer settings.
High Gain
-12–+12 dB
Adjusts the level of the high-
frequency range.
High Freq
1.25 k–16.0 k (Hz)
Frequency point in the high-
frequency range. Generally,
this changes the level at and
over this frequency.
High Mid
Gain
-12–+12 dB
Adjusts the level of the mid-
to high-frequency range.
High Mid
Freq
16–16.0 k (Hz)
Frequency point in the mid-
to high-frequency range to
midrange. This changes the
level of the specified
bandwidth centered on this
frequency.
High Mid Q
0.5, 1.0, 2.0, 4.0,
8.0
Changes the bandwidth of
the mid- to high-frequency
range. The bandwidth
affected by the controls
narrows as the value
increases.
Low Mid
Gain
-12–+12 dB
Adjusts the level of the low-
frequency range to
midrange.
Low Mid
Freq
16–16.0 k (Hz)
Frequency point in the low-
frequency range to
midrange. This changes the
level of the specified
bandwidth centered on this
frequency.
Low Mid Q
0.5, 1.0, 2.0, 4.0,
8.0
Changes the bandwidth of
the low-frequency range to
midrange. The bandwidth
affected by the controls
narrows as the value
increases.
Low Gain
-12–+12 dB
Adjusts the level of the low-
frequency range.
Low Freq
100–1.0 k (Hz)
Frequency point in the low-
frequency range. Generally,
this changes the level at and
below this frequency.
NOTE
LX-10_e.book 81 ページ 2009年2月13日 金曜日 午前10時39分