User manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Quick Page Reference Table
- Contents
- Contents of the Package
- Panel Descriptions
- Driver Installation
- About the Operating Modes
- Performing
- Setting the MIDI Transmit Channel (MIDI CHANNEL)
- Switching Sounds
- Shifting the Pitch of the Keyboard
- Using the Lever to Modify the Sound
- Using the D-BEAM to Modify the Sound
- Using the Knobs to Modify the Sound
- Using the Pedals to Modify the Sound
- Using Aftertouch to Modify the Sound
- Halting Stuck Notes (PANIC)
- Changing the A-49 Settings
- Changing the Velocity Curve (VELO CURVE)
- Specifying the Keyboard Velocity Value (KEY VELO)
- Switching the Function of the [C2] Knob in SuperNATURAL Mode (SN SETTING)
- Assigning Functions to the Knobs, Buttons, and Jacks
- Changing the Direction of Value Increases for the Knobs, D-BEAM Controller, Buttons, and Pedals (CTRL DIR)
- Selecting the Dedicated Driver or the Generic Driver
- Restoring the Factory Settings (FACT RESET)
- Troubleshooting
- Main Specifications
- Index
10
Panel Descriptions
Panel
POWER indicator
This will light if the A-49
is connected to your
computer via USB.
[FUNCTION] button
If you press this button so
it’s lit, you can change the
MIDI channel or transmit
a program change by
pressing the appropriate
keys (p. 23).
[Pitch Bend/Modulation]
lever
Use this lever to vary the pitch or
to apply vibrato (p. 29).
D-BEAM
controller
Move your hand above
this to apply various
eects to the sound.
D-BEAM (p. 30)
[PITCH]
button
If this is turned
on, the D-BEAM
controller will
control the pitch.
[VOL] button
If this is turned
on, the D-BEAM
controller will control
the volume.
[ASSIGN] button
If this is turned on, the
D-BEAM controller will
control the function you’ve
assigned. (Factory setting:
aftertouch)
[SuperNATURAL] button
If this is turned on, you’ll be
able to control a connected
SuperNATURAL sound module
(p. 24).
[C1][C2] knobs
Turn this knob to use the
function you’ve assigned
(p. 31).
[S1][S2] buttons
You can switch sounds by
pressing these buttons
(p. 26).