User manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Quick Page Reference Table
- Contents
- Contents of the Package
- Panel Descriptions
- Driver Installation
- About the Operating Modes
- Performing
- Setting the MIDI Transmit Channel (MIDI CHANNEL)
- Switching Sounds
- Shifting the Pitch of the Keyboard
- Using the Lever to Modify the Sound
- Using the D-BEAM to Modify the Sound
- Using the Knobs to Modify the Sound
- Using the Pedals to Modify the Sound
- Using Aftertouch to Modify the Sound
- Halting Stuck Notes (PANIC)
- Changing the A-49 Settings
- Changing the Velocity Curve (VELO CURVE)
- Specifying the Keyboard Velocity Value (KEY VELO)
- Switching the Function of the [C2] Knob in SuperNATURAL Mode (SN SETTING)
- Assigning Functions to the Knobs, Buttons, and Jacks
- Changing the Direction of Value Increases for the Knobs, D-BEAM Controller, Buttons, and Pedals (CTRL DIR)
- Selecting the Dedicated Driver or the Generic Driver
- Restoring the Factory Settings (FACT RESET)
- Troubleshooting
- Main Specifications
- Index
Panel Descriptions
11
[TRANSPOSE] button, OCTAVE/TRANSPOSE indicator, [+][–] buttons
In PLAY mode (p. 22), you can press the [TRANSPOSE] button to switch the function of the OCTAVE/TRANSPOSE
indicator and the [+] [–] buttons.
When the [TRANSPOSE] button is turned on, the transposition setting is enabled. When the [TRANSPOSE] button
is turned o, the transposition setting is disabled.
Button Function OCTAVE/TRANSPOSE indicator
[+][–] buttons Change the octave setting (p. 28) Indicates the octave setting
[TRANSPOSE] +
[+][–] buttons
Change the transpose setting(p. 28) Indicates the transpose setting
The OCTAVE/TRANSPOSE indicator and the setting it shows
-6
Unlit Lit
-5 -4 -3 -2 -1 0 1 2 3 4 5