User manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Quick Page Reference Table
- Contents
- Contents of the Package
- Panel Descriptions
- Driver Installation
- About the Operating Modes
- Performing
- Setting the MIDI Transmit Channel (MIDI CHANNEL)
- Switching Sounds
- Shifting the Pitch of the Keyboard
- Using the Lever to Modify the Sound
- Using the D-BEAM to Modify the Sound
- Using the Knobs to Modify the Sound
- Using the Pedals to Modify the Sound
- Using Aftertouch to Modify the Sound
- Halting Stuck Notes (PANIC)
- Changing the A-49 Settings
- Changing the Velocity Curve (VELO CURVE)
- Specifying the Keyboard Velocity Value (KEY VELO)
- Switching the Function of the [C2] Knob in SuperNATURAL Mode (SN SETTING)
- Assigning Functions to the Knobs, Buttons, and Jacks
- Changing the Direction of Value Increases for the Knobs, D-BEAM Controller, Buttons, and Pedals (CTRL DIR)
- Selecting the Dedicated Driver or the Generic Driver
- Restoring the Factory Settings (FACT RESET)
- Troubleshooting
- Main Specifications
- Index
Driver Installation
17
13. Conrm that [A-Series Keyboard] appears in the “MIDI Studio” window or the
“Audio MIDI Settings” dialog box.
If [A-Series Keyboard] does not appear or if it is grayed out, it means that the A-49 is not being
detected properly. Click [Rescan MIDI]. Also try disconnecting and reconnecting the A-49’s USB
cable.
14. Click [Add Device] two time.
Two [New Device] items will appear.
15. Specify device names for the newly added [New Device].
1. Click each newly added [New Device] to select it, and then click [Show Info].
2. Enter the desired name in the [Device Name] eld, and then click [Apply].
Enter the following for each [New Device].
New Device Device Name
First Keyboard
Second MIDI OUT
14
16
15
13