User manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Quick Page Reference Table
- Contents
- Contents of the Package
- Panel Descriptions
- Driver Installation
- About the Operating Modes
- Performing
- Setting the MIDI Transmit Channel (MIDI CHANNEL)
- Switching Sounds
- Shifting the Pitch of the Keyboard
- Using the Lever to Modify the Sound
- Using the D-BEAM to Modify the Sound
- Using the Knobs to Modify the Sound
- Using the Pedals to Modify the Sound
- Using Aftertouch to Modify the Sound
- Halting Stuck Notes (PANIC)
- Changing the A-49 Settings
- Changing the Velocity Curve (VELO CURVE)
- Specifying the Keyboard Velocity Value (KEY VELO)
- Switching the Function of the [C2] Knob in SuperNATURAL Mode (SN SETTING)
- Assigning Functions to the Knobs, Buttons, and Jacks
- Changing the Direction of Value Increases for the Knobs, D-BEAM Controller, Buttons, and Pedals (CTRL DIR)
- Selecting the Dedicated Driver or the Generic Driver
- Restoring the Factory Settings (FACT RESET)
- Troubleshooting
- Main Specifications
- Index
Performing
27
MEMO
You can change the functions that are assigned to the [S1] [S2] buttons. For details, refer to
“Assigning Functions to the Knobs, Buttons, and Jacks” (p. 37).
To select sounds from a dierent bank, rst transmit a Bank Select message, and then transmit a
Program Change message.
* Simply transmitting a Bank Select message will not make the sound change.
* The Bank Select message must be sent before the Program Change message.
What is a bank?
MIDI sound modules organize their numerous sounds in various groups according to the
category of sound. These groups are called “banks.”
”Program change messages can only select sounds within the same bank, but by using
these in conjunction with bank select messages, you can select dierent variations of
sound.
* The way in which sounds are organized will dier for each sound module. For details,
refer to the owner’s manual of the sound module you are using.
Transmitting the Bank Select MSB
Value 0–127
0–9
For details on this value, refer to p. 8.
Transmitting the Bank Select LSB
For details on this value, refer to p. 8.
Value 0–127
0–9