User manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Quick Page Reference Table
- Contents
- Contents of the Package
- Panel Descriptions
- Driver Installation
- About the Operating Modes
- Performing
- Setting the MIDI Transmit Channel (MIDI CHANNEL)
- Switching Sounds
- Shifting the Pitch of the Keyboard
- Using the Lever to Modify the Sound
- Using the D-BEAM to Modify the Sound
- Using the Knobs to Modify the Sound
- Using the Pedals to Modify the Sound
- Using Aftertouch to Modify the Sound
- Halting Stuck Notes (PANIC)
- Changing the A-49 Settings
- Changing the Velocity Curve (VELO CURVE)
- Specifying the Keyboard Velocity Value (KEY VELO)
- Switching the Function of the [C2] Knob in SuperNATURAL Mode (SN SETTING)
- Assigning Functions to the Knobs, Buttons, and Jacks
- Changing the Direction of Value Increases for the Knobs, D-BEAM Controller, Buttons, and Pedals (CTRL DIR)
- Selecting the Dedicated Driver or the Generic Driver
- Restoring the Factory Settings (FACT RESET)
- Troubleshooting
- Main Specifications
- Index
Performing
29
Using the Lever to Modify the Sound
Changing the pitch of a sounding note (Pitch Bend)
Moving the [Pitch Bend/Modulation] lever to the left or right will transmit pitch bend messages,
causing the pitch to change slightly.
* The range of the pitch change (“bend range”) will depend on the settings of your sound
module.
Applying modulation to a sounding note (Modulation)
Moving the bender lever away from yourself will transmit modulation messages (CC#01), applying
a vibrato eect to the sound.
* The way in which the sound changes will depend on the settings of your sound module.
MEMO
Moving the lever toward the left while you play will lower the
pitch, and moving it toward the right will raise the pitch. This eect
is called “pitch bend.”
Moving the lever away from yourself will apply vibrato. This eect
is called “modulation.”
If you move the lever to left or right and simultaneously move it
away from yourself, both eects will apply at the same time.
* The amount of pitch change (bend range) depends on the settings
of your sound module.
Modulation eect
Pitch bend eect