User manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Quick Page Reference Table
- Contents
- Contents of the Package
- Panel Descriptions
- Driver Installation
- About the Operating Modes
- Performing
- Setting the MIDI Transmit Channel (MIDI CHANNEL)
- Switching Sounds
- Shifting the Pitch of the Keyboard
- Using the Lever to Modify the Sound
- Using the D-BEAM to Modify the Sound
- Using the Knobs to Modify the Sound
- Using the Pedals to Modify the Sound
- Using Aftertouch to Modify the Sound
- Halting Stuck Notes (PANIC)
- Changing the A-49 Settings
- Changing the Velocity Curve (VELO CURVE)
- Specifying the Keyboard Velocity Value (KEY VELO)
- Switching the Function of the [C2] Knob in SuperNATURAL Mode (SN SETTING)
- Assigning Functions to the Knobs, Buttons, and Jacks
- Changing the Direction of Value Increases for the Knobs, D-BEAM Controller, Buttons, and Pedals (CTRL DIR)
- Selecting the Dedicated Driver or the Generic Driver
- Restoring the Factory Settings (FACT RESET)
- Troubleshooting
- Main Specifications
- Index
34
To change settings for the A-49, you need to be in FUNCTION mode.
Parameter Factory setting Explanation Page
VELO CURVE 1-MEDIUM
When you play the A-49’s keyboard, the transmitted
note message will include a velocity value (volume
data) corresponding to the force of your strike.
The VELO CURVE setting lets you choose the curve by
which the velocity value will change.
p. 35
KEY VELO TOUCH Species the velocity value of the keys you play. p. 36
SN SETTING MODE 0
Switches the function of the [C2] knob in SuperNATU-
RAL mode.
p. 36
[C1] knob Cuto (CC#74)
Switches the functions assigned to the knobs, buttons,
and jacks.
p. 37
[C2] knob
Resonance
(CC#71)
[ASSIGN] button Aftertouch
[S1] button
Switches
the sound
(decrements
the program
change
number)
[S2] button
Switches
the sound
(increments
the program
change
number)
HOLD jack Hold (CC#64)
EXPRESSION jack
Expression
(CC#11)
CTRL DIR
Positive
direction
Species whether turning the knob toward the right
will transmit successively higher, or successively lower
values.
The same setting can be made for the D-BEAM
controller, buttons, and pedals.
p. 40
ADV ADVANCED
Species whether the A-49 will use the dedicated
driver described in “Driver Installation” (p. 13) (AD-
VANCED), or the standard driver provided by the
operating system (GENERIC).
p. 40
FACT RESET —
Returns all of the A-49’s settings to their factory-set
state.
p. 41
Changing the A-49 Settings