User manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Quick Page Reference Table
- Contents
- Contents of the Package
- Panel Descriptions
- Driver Installation
- About the Operating Modes
- Performing
- Setting the MIDI Transmit Channel (MIDI CHANNEL)
- Switching Sounds
- Shifting the Pitch of the Keyboard
- Using the Lever to Modify the Sound
- Using the D-BEAM to Modify the Sound
- Using the Knobs to Modify the Sound
- Using the Pedals to Modify the Sound
- Using Aftertouch to Modify the Sound
- Halting Stuck Notes (PANIC)
- Changing the A-49 Settings
- Changing the Velocity Curve (VELO CURVE)
- Specifying the Keyboard Velocity Value (KEY VELO)
- Switching the Function of the [C2] Knob in SuperNATURAL Mode (SN SETTING)
- Assigning Functions to the Knobs, Buttons, and Jacks
- Changing the Direction of Value Increases for the Knobs, D-BEAM Controller, Buttons, and Pedals (CTRL DIR)
- Selecting the Dedicated Driver or the Generic Driver
- Restoring the Factory Settings (FACT RESET)
- Troubleshooting
- Main Specifications
- Index
Changing the A-49 Settings
38
Assigning a Control Change Number (CC#)
[S1] [S2] buttons
For details on this value, refer to p. 8.
Value 0–127
0–9
Press either
Latched
Momentary
Button [S1][S2] buttons
[+] button
The button will alternately transmit ON (127) and OFF (0) each time you press it (Latched
operation)
[–] button
The button will transmit ON (127) when you press it, and OFF (0) when you release it
(Momentary operation)
Other controllers
Operate either
For details on this value, refer to p. 8.
Value 0–127
0–9
* You can’t assign CC#0 (Bank Select MSB) or CC#32 (Bank select LSB).