Operation Manual

Driver Installation
16
If a dialog box requesting a password appears during installation, enter a computer
administrator’s user name and password and click the [Install Software] button or [OK] button.
5. When “Welcome to the A-Series Keyboard Driver installer” appears, click
[Continue].
6. If the screen for selecting the installation destination appears, select the startup
disk and click [Continue].
7. When the installation type appears, click [Install] or [Upgrade].
8. Click [Continue Installation] in the next screen.
9. When installation has nished, click [Restart] to restart the Mac.
It may take some time for the computer to restart.
10. After the Mac restarts, connect the
USB cable of the A-49 to the Mac.
* Turn down the volume on any peripheral
devices before connecting the USB cable.
* This unit is equipped with a protection
circuit. A brief interval (a few seconds)
after turning the unit on is required
before it will operate normally.
11. Open the [Applications] folder and then the [Utilities] folder, and then double-
click [Audio MIDI Setup].
The “Audio MIDI Setup” dialog box will appear.
12. Open the MIDI device settings dialog box.
Operating System Operation
Mac OS X v10.6 or later
Select [Show MIDI Window] in the [Window] menu.
(The “MIDI Studio” window will appear.)
Mac OS X v10.5 or earlier Click the [MIDI Devices] tab.
A-49
rear panel
Mac OS X