Owner`s manual

Front and Rear Panels

Rear Panel

fig.2

1 AC IN

Connect the included power cable here.

To avoid malfunction, connect only the power supply cord that was supplied

with the unit.

2 WORD CLOCK IN/OUT Connectors

IN:

When supplying a sampling clock from an external device to the ADA-7000, input the

WORDCLOCK signal here. Use this when you want the reference clock to be another

device that outputs a high-precision sampling clock, or when synchronizing to a device

that has only a WORDCLOCK OUT.

fig.3.e

• If you have selected “WORD CLOCK” as the sampling clock of the ADA-7000,

you must set the master clock of the connected device to the R-BUS to which that

ADA-7000 is connected.

• If the master clock of the device connected to the R-BUS connector is the word

clock signal, you must select “R-BUS” as the sampling clock of the ADA-7000.

3 5

42 61

Sampling Clock Master

ADA-7000

Digtal Tape Recorder

TERMINATOR

SWITCH: ON

CLOCK SOURCE: WORD CLOCK

WORD CLOCK IN

WORD CLOCK OUT