User`s manual

98
Chapter 4 Feature Reference
4-8 Recording the Amount of Remaining Media
Displaying the Amount of Remaining Media on the Screen
Procedure
➊
Press .
Press
.
➋
Press .
Press
.
➌
Press .
Use
to set the amount of media remaining.
Press
to enable the setting.
➍
Press .
Press
to go back to the original screen.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining, the amount
remaining is displayed at the top menu until it reaches zero. If you cancel the setup such as by removing the media or
raising the loading lever, the amount remaining at that time flashes on the screen.
The amount of media remaining is not updated automatically when you change the media. Redo the setting
whenever you change the media. You can also make the setting to display this menu automatically whenever you
change the media. See the next section "Verifying the Setting for the Amount Remaining Every Time the Media Is
Changed."
* The remaining amount that is displayed is only an estimate, and its accuracy is not assured.
Verifying the Setting for the Amount Remaining Every Time the Media Is Changed
Procedure
➊
Press .
Press
.
➋
Press .
Press
.
➌
Press .
Use
to select "ENABLE."
Press
to enable the setting.
➍
Press .
Press
to go back to the original screen.
MENU
SHEET REMAIN
MENU
SHEET REMAIN
SHEET REMAIN
SET LENGTH
SET LENGTH
0.0 m
25.0 m
SHEET REMAIN
AUTO DISPLAY
AUTO DISPLAY
DISABLE
ENABLE
W 2600 mm L 25.0 m
SETUP SHEET
L 25.0m
The display is updated.
If setup has not been performed,
the set value flashes.
W 2600 mm
SETUP SHEET