Owner`s manual

23
Creating a Patch
This screen is used mainly to select patches.
By changing the Player Select setting you can switch between
playing the section (ALL) or playing a solo (1–6).
Patch Selection and Indicator
Move the cursor to PATCH Number/Name and change the value to
select a patch (001–050).
fig.01-004.eps
The indicators show the following information.
*1 This setting cannot changed in the main screen. You can adjust
this in “Playing settings (Section Style screen)” (p. 29)
These Parameters can be controlled using a specified controller
(p. 39).
*2 This setting cannot changed in the main screen. You can adjust
this in “Applying effects (Routing screen)” (p. 33)
About this manual
• The screen images used in this manual are taken from a Fantom-G with the ARX-03 installed. The various procedures described also
assume that you are using the ARX-03 installed in a Fantom-G.
• For details on how to move the cursor or edit a value, refer to the owner’s manual for the device in which you’ve actually installed the
ARX-03.
Main Screen
PATCH Number/Name
3
2
5
4
1
6 7
No.
Indicator Description
1
L/R Level Indicator Left/right levels of the sound
2 Player Indicator The players that are currently playing will be lit
3
Section Group
Indicator
The indicators will be lit at the same height for
players in the same group
4
Section Play Mode
Indicator
Play mode status *1
5 Variation Indicator Performance variation status *1
6 MFX Switch Turns the multi-effect on/off *2
7 Reverb Switch Turns the reverb on/off *2
ARX-03_e.book 23 ページ ２００９年２月２６日 木曜日 午前９時６分