Owner`s manual

36
Reverb settings (Reverb screen)
In the Effects/Reverb screen you can specify the type of reverb and
how it will sound.
From Main Screen
F6>F6
(on the Fantom-G)
Parameter Value Description
Reverb Type
00 (OFF),
01 (ROOM),
02 (HALL),
03 (PLATE),
04 (STUDIO),
05 (CHURCH),
06 (SRV ROOM),
07 (SRV HALL),
08 (SRV PLATE)
Reverb type
Reverb Switch OFF, ON Turns the reverb on/off
Type: 1 (ROOM)/ 4 (STUDIO)
Pre Delay 0–100 ms
Delay time from the original
sound until the reverb is heard
Time 0.1–3.0 sec.
Time over which the reverb
sound decays
Low Damp Freq 20–1000 Hz
Frequency below which the low
range of the reverb sound will be
dampened
Low Damp 1–100%
Amount of attenuation for LF
damp
(100%: no effect)
High Damp Freq 1000–10000 Hz
Frequency above which the high
range of the reverb sound will be
dampened
High Damp 1–100%
Amount of attenuation for HF
damp
(100%: no effect)
High Cut Freq 1000–10000 Hz
Frequency above which the high
range of the final output sound
will be cut
Type: 2 (HALL)/ 3 (PLATE)/5 (CHURCH)
Pre Delay 0–100 ms
Delay time from the original
sound until the reverb is heard
ARX-03_e.book 36 ページ ２００９年２月２６日 木曜日 午前９時６分