Owner`s manual

41
In the Utility screen you can initialize patch.
This operation lets you return the settings of the current patch to their
default values.
Patch Init will initialize the settings of the current patch.
1. Select the patch that you want to initialize.
2. In the Utility screen, choose Patch Init.
3. When the confirmation screen appears, press the [F7]
(OK) button.
If you decide to cancel, press the[F8] (EXIT) button.
A patch you’ve created is temporary; it will be lost if you select a
different patch. If you want to save the patch you’ve edited, proceed
as follows.
1. Press the [WRITE] on the Fantom-G.
2. Assign a name to the patch.
For details on how to assign a name, refer to the Fantom-G
owner’s manual.
fig.01-101.eps
3. When you’ve finished assigning the name, press the
[F8] (OK) button.
4. Select a patch number, and press the [F8] (WRITE)
button.
5. When the confirmation screen appears, press the [F7]
(OK) button to save the patch.
* If you’ve installed the ARX-03 in a Fantom-G6/G7/G8, executing
a Factory Reset for the Fantom-G6/G7/G8 will reset the
expansion boards to their factory-set condition.
Initializing a Patch (Utility Screen)
Saving a Patch (on the Fantom-G)
ARX-03_e.book 41 ページ ２００９年２月２６日 木曜日 午前９時６分