Owner`s manual

45
05: COMPRESSOR
Flattens out high levels and boosts low levels, smoothing out fluctuations in
volume.
fig.MFX26
06: LIMITER
Compresses signals that exceed a specified volume level, preventing
distortion from occurring.
fig.MFX27
Parameter
Value Description
Attack #
0–127
Time from when the volume goes up the
Threshold level until the compressor effect
applies
Threshold # 0–127
Adjusts the volume at which compression
begins
Post Gain 0–18 dB Adjusts the output gain.
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Level # 0–127 Output level
L in
R in
L out
R out
Compressor
2-Band EQ
2-Band EQ
Compressor
Parameter
Value Description
Release #
0–127
Adjusts the time after the signal volume
falls below the Threshold Level until com-
pression is no longer applied.
Threshold # 0–127
Adjusts the volume at which compression
begins
Ratio
1.5:1, 2:1, 4:1,
100:1
Compression ratio
Post Gain 0–18 dB Adjusts the output gain.
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Level # 0–127 Output level
L in
R in
L out
R out
Limiter
2-Band EQ
2-Band EQ
Limiter
ARX-03_e.book 45 ページ ２００９年２月２６日 木曜日 午前９時６分