Owner`s manual

48
10: TAPE ECHO
A virtual tape echo that produces a realistic tape delay sound. This
simulates the tape echo section of a Roland RE-201 Space Echo.
fig.MFX35
Echo Level
Echo Level
L in
R in
L out
R out
Tape Echo
Direct Level
Direct Level
Parameter
Value Description
Mode
S, M, L, S+M,
S+L, M+L,
S+M+L
Combination of playback heads to use
Select from three different heads with
different delay times.
S: short
M: middle
L: long
Repeat Rate # 0–127
Tape speed
Increasing this value will shorten the
spacing of the delayed sounds.
Intensity # 0–127 Amount of delay repeats
Bass -15– +15
Boost/cut for the lower range of the echo
sound
Treble -15– +15
Boost/cut for the upper range of the echo
sound
Head S Pan
L64–63R
Independent panning for the short,
middle, and long playback heads
Head M Pan
Head L Pan
Tape Distortion 0–5
Amount of tape-dependent distortion to
be added
This simulates the slight tonal changes
that can be detected by signal-analysis
equipment. Increasing this value will
increase the distortion.
Wow/Flutter Rate 0–127
Speed of wow/flutter (complex variation
in pitch caused by tape wear and
rotational irregularity)
Wow/Flutter
Depth
0–127 Depth of wow/flutter
Echo Level # 0–127 Volume of the echo sound
Direct Level # 0–127 Volume of the original sound
Level 0–127 Output level
ARX-03_e.book 48 ページ ２００９年２月２６日 木曜日 午前９時６分