Owner`s manual

50
12: STEREO DELAY
This is a stereo delay.
When Feedback Mode is NORMAL:
When Feedback Mode is CROSS:
fig.MFX39b
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Parameter
Value Description
Feedback Mode
NORMAL,
CROSS
Selects the way in which delay sound is
fed back into the effect. (See the figures
of algorithm.)
Delay Left
0–2000 ms,
note
Adjusts the time until the delay sound is
heard.
Delay Right
Phase Left
NORMAL,
INVERT
Phase of the delay sound
Phase Right
Feedback # -98– +98 %
Adjusts the amount of the delay sound
that’s fed back into the effect.
Negative (-) settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don’t want to filter out any high frequen-
cies, set this parameter to BYPASS.
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
ARX-03_e.book 50 ページ ２００９年２月２６日 木曜日 午前９時６分