Manualshelf

Owner's manual

ManualsBrandsRoland ManualsMusical InstrumentsAX-Edge
12345678910
1
1. Data Reception (Sound
Source Section)
9 Channel Voice Messages
7 Note off
Status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note off velocity: 00H - 7FH (0 - 127)
7 Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note on velocity: 01H - 7FH (1 - 127)
7 Control Change
* If the corresponding Controller number is selected for the Src1, 2, 3 or
4 parameter (PROGRAM SOUND: MFX: MFX CTRL), the corresponding effect will
occur.
6 Bank Select (Controller number 0, 32)
Status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = Bank number: 00 00H - 7F 7FH (bank.1 - bank.16384)
* Not received when the Rx Bank parameter (SYSTEM: MIDI RX) is OFF.
* Not received when the Rx Bank parameter (PROGRAM CTRL: MIDI RX) is OFF.
The Programs corresponding to each Bank Select are as follows.
BANK SELECT | PROGRAM | GROUP | NUMBER
MSB | LSB | NUMBER | |
-----+-----------+-----------+----------------------------+-------------
084 | 000 | 001 - 128 | Program | 01 - 128
: | : | | | :
002 | 001 - 064 | | | 257 - 320
The Tones corresponding to each Bank Select are as follows.
BANK SELECT | PROGRAM | GROUP | NUMBER
MSB | LSB | NUMBER | |
-----+-----------+-----------+----------------------------+-------------
087 | 000 - 001 | 001 - 128 | User Tone | 0001 - 0256
-----+-----------+-----------+----------------------------+-------------
087 | 064 | 001 - 128 | Preset Tone | 0001 - 0128
| : | | | :
| 067 | 001 - 075 | | 0385 - 0459
| 085 | 001 - 128 | | 0460 - 0587
| : | | | :
| 091 | 001 - 069 | | 1228 - 1296
6 Modulation (Controller number 1)
Status 2nd byte 3rd byte
BnH 01H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Modulation depth: 00H - 7FH (0 - 127)
* Not received when the Rx Mod parameter (PROGRAM CTRL: MIDI RX) is OFF.
6 Portamento Time (Controller number 5)
Status 2nd byte 3rd byte
BnH 05H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Portamento Time: 00H - 7FH (0 - 127)
* The Porta Time parameter (PROGRAM SOUND: TONE) will change.
6 Data Entry (Controller number 6, 38)
Status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specied by RPN/NRPN
mm = MSB, ll = LSB
6 Volume (Controller number 7)
Status 2nd byte 3rd byte
BnH 07H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Volume: 00H - 7FH (0 - 127)
* Not received when the Rx Volume parameter (SOUND CTRL: MIDI RX) is OFF.
* The Level parameter (PROGRAM SOUND: TONE) will change.
6 Panpot (Controller number 10)
Status 2nd byte 3rd byte
BnH 0AH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Panpot: 00H - 40H - 7FH (Left - Center - Right)
* Not received when the Rx Pan parameter (SOUND CTRL: MIDI RX) is OFF.
* The Pan parameter (PROGRAM SOUND: TONE) will change.
6 Expression (Controller number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number:0H - FH (ch.1 - 16)
vv = Expression:00H - 7FH (0 - 127)
* Not received when the Rx Exp parameter (PROGRAM CTRL: MIDI RX) is OFF.
6 Hold 1 (Controller number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
0-63 = OFF, 64-127 = ON
* Not received when the Rx Hold-1 parameter (SOUND CTRL: MIDI RX) is OFF.
6 Portamento (Controller number 65)
Status 2nd byte 3rd byte
BnH 41H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
0-63 = OFF, 64-127 = ON
* The Porta Sw parameter (PROGRAM SOUND: TONE) will change.
Model: AX-Edge
Data: Jul 1, 2020
Version: 1.01
AX-Edge MIDI Implementation
02
© 2018 Roland Corporation

Summary of content (21 pages)