User`s manual

1-2 About This Machine
Chapter 1 Introduction
8
Part Names and Functions
Rotary axis unit
Operation panel screen
When the rotary axis unit is installed, the operation-panel screen shows the following items.
Live center
This supports the loaded workpiece.
Core-support adjuster
Core-support retaining lever
This secures the location of the core support
in place to match the length of the workpiece.
Chuck-tightening knob
Workpiece chuck
This is a vise-type workpiece chuck. You
turn the chuck-tightening knob to secure
the workpiece in place.
Core support
Workpiece Length
This displays a dialog box for entering the
length.
☞ P.25 "3-2 Loading a Workpiece"
Adjuster lock
Workpiece Drilling
This displays a dialog box for drilling a hole
to support the workpiece.
☞ P.25 "3-2 Loading a Workpiece"
Angle-fixing control
This keeps the rotary axis unit immobile
at the set angle. To change the angle of
the rotary axis unit, pull the control back
toward you.
Angle-adjustment dial
This changes the angle of the ro-
tary axis unit. Each tick of the scale
corresponds to 15 degrees of tilt.
A-axis rotation buttons
This display the present coordinate
value (workpiece coordinate system)
for the A axis.
A-axis coordinate
This displays the present
coordinate value for the
A axis.