User`s manual

2-3 Setting the Y-axis Origin Point for the Center of Rotation
Chapter 2 Preparation
14
2. Use the live center to secure the sensor.
➊
Mount the live center on the core support.
➋
Loosen the core-support retaining lever.
Move the core support and bring the live center into con-
tact with the small Y-origin sensor.
Line up the center hole of sensor and the tip of the live center and
install.
➌
Tighten the core-support retaining lever.
➍
Turn the core-support adjuster half a turn.
Tighten the adjuster lock completely.
Make sure to fasten the sensor securely.
Core support
Live center
Core support
Core-support retaining lever
Core-support retaining lever
1. Loosen
2. Turn the handle to extend
the end about 5 mm.
3. Insert
About 5 mm
Adjuster lock
Core-support adjuster
2. Tighten completely
1. Turn