User`s manual

2-3 Setting the Y-axis Origin Point for the Center of Rotation

Chapter 2 Preparation

➌

Move the core support and bring the live center into con-

tact with the large Y-origin sensor.

Tighten the core-support retaining lever.

Line up the center hole of sensor and the tip of the live center and

install.

➍

Turn the core-support adjuster half a turn.

Tighten the adjuster lock completely.

Make sure to fasten the sensor securely.

➎

Insert the sensor cable into the hole on the back of the

sensor.

➏

Close the front cover.

Core support

Core-support retaining lever

Pass here

Insert

Adjuster lock

Core-support adjuster

2. Tighten completely

1. Turn