User`s manual

Chapter 3 Operation
25
3-2 Loading a Workpiece
Loading a Workpiece Less Than 120 mm in Length
The mounting method varies according to the length of the workpiece you're loading. When you're loading a workpiece
measuring less than 120 mm, follow the steps below.
1. Entering the length of the workpiece at the operation panel screen.
➊
Click [Workpiece Length].
➋
Enter the length of the mounted workpiece.
Click [OK].
2. Carry out the preparations for securing the workpiece in place.
➊
Close the front cover.
Press the VIEW button to make the VIEW light go out.
➋
Turn the workpiece chuck to a position where the chuck-
tightening knob is facing upward.
➌
Open the front cover.
Secure the workpiece in place on the workpiece chuck.
Fasten the workpiece securely, so that it will not fall.
Chuck-tightening knob
Workpiece
Chuck-tightening knob