User`s manual

3-2 Loading a Workpiece
Chapter 3 Operation
29
4. Use the live center to secure the workpiece in place.
➊
Mount the live center on the core support.
➋
Loosen the core-support retaining lever.
Move the core support and bring the live center into con-
tact with the workpiece.
➌
Tighten the core-support retaining lever.
➍
Turn the core-support adjuster half a turn.
Tighten the adjuster lock completely.
Securing the Workpiece in Place
After securing the workpiece in place using the live center, go to the operation-panel screen and rotate the A axis. If
the workpiece and the live center turn together, the workpiece is fastened securely. If the live center does not turn,
loosen the adjuster lock, turn the core-support adjuster, then secure the control in place again with the adjuster lock.
Core-support retaining lever
Core-support
1. Turn
2. Tighten completely
Core support
Live center
2. Turn the handle to extend
the end about 5 mm.
3. Insert
About 5 mm
1. Loosen
Core-support retaining lever
Core-support adjuster
Adjuster lock